[TRNSYS-users] Replotting the TRNSYS printer in Excell

[Jeff Thornton]

You can also use the version of the online plotter that writes the results to an output file.

Jeff - TESS

Sent from my iPhone

> On May 21, 2018, at 12:01 PM, Yossef Ibrahimi via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hi,
> You can use a printer (type 25c) instead of the online plotter (type 65d) in order to write your results to a .out file or .csv file, then open the generated file using Excel to plot your data.
> Regards,
> 
> Le lundi 21 mai 2018 à 14:56:43 UTC, Amirahmad Zare via TRNSYS-users <trnsys-users at lists.onebuilding.org> a écrit :
> 
> 
> Hello,
> 
> I would like to use excel to replot the temperatures and other variables that I print using type 65d to have more control over X axis and line thickness etc compared to what I see in the dck file. What is the most efficient way to get the data that is used in type 65d and plot it using other software?
> 
> Thanks,
> Amir Zare 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180521/7c9f1303/attachment.htm>