[TRNSYS-users] wall thickness impact on zone volume

[David BRADLEY]

PJ,

   The physical thickness of the wall is not counted in the zone volume. 
It only impacts the thermal properties of the materials. There is not 
100% consensus in the building modeling community as to which dimension 
(inside, outside, or middle) to choose. I typically use the interior 
dimension for external walls and the middle dimension for internal walls.

kind regards,

  David



On 05/23/2018 00:35, PJ via TRNSYS-users wrote:
>
> Dear support team,
>
> I am working on Sketchup 8 to model a house.
>
> What I am trying to do is to trace the internal geometry to build my 
> house model and then apply thickness of the wall.
>
> Generally, how does TRNBLD account for wall thickness in the wall 
> materials, does this just impact the thermal properties of the 
> material, or does this also impact volume? If so, which direction will 
> it impact the volume? Inside, outside, or half-half?
>
> Is it possible to assign a wall thickness specifically to go 
> internally to ensure the internal volume will be accurate if I trace 
> external wall?
>
> Or do I have to trace internal walls. The issue with having to trace 
> internal walls is that I then left with gaps in between rooms.
>
> Thanks in advance.
>
> Best Regards,
>
> PJ
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180523/7d021e15/attachment-0001.html>