[TRNSYS-users] Reading Parameter from Types

[David BRADLEY]

Tom,

  Parameters cannot be passed from one component to another. The best 
solution, I think, would be to take the pipe diameter as a parameter to 
your model. In the simulation studio you can then set the value of that 
parameter as the result of an equation (select units of "string" in 
Trnsys17 or units of "variable name" in Trnsys18). Then define an 
equation such as

pipe_dia = 0.02

and use pipe_dia as the value of the parameter for both components.

kind regards,

  David



On 03/04/2018 14:45, s0537085 via TRNSYS-users wrote:
>
> Dear TRNSYS-Community,
>
> for my own type I need to know the diameter of type 31, in order to 
> apply Torricelli´s Law. There for I´m looking for an solution to get 
> the parameter of type 31. Is there a way?
>
> Kind regards
>
> Tom
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180305/1e87bcd8/attachment.html>