[TRNSYS-users] parametric study in buildings

Dr Yi Zhang yi at jeplus.org
Thu Jun 28 01:28:48 PDT 2018


Dear Oussama,

 

Parametrics including changing window sizes is a perfect use case for
jEPlus. You can see how it is done with the example described here:
http://www.jeplus.org/wiki/doku.php?id=docs:manual_1_7_examples#change_windo
w_size. It is with EnergyPlus. However, if you are know how window
coordinates are defined in TRNSYS, the example can be easily adapted to work
with it, too. 

 

jEPlus also looks after executing your parametric cases in parallel, by the
way.

 

Regards,

 

Yi

 

From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On
Behalf Of Oussama Ibrahim via TRNSYS-users
Sent: 27 June 2018 11:33
To: TRNSYS users mailing list at OneBuilding.org
Cc: Oussama Ibrahim
Subject: Re: [TRNSYS-users] parametric study in buildings

 

Dear Christoph,

 

Thanks very much for your helpful reply.

 

Best,

Oussama

----
Oussama Ibrahim
Lebanese University 
Tel: 961-70-818470 
E-mail: oibrahimul at hotmail.com ; oibrahim1984 at gmail.com 

 

  _____  

From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> on behalf of
hotline via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Sent: Tuesday, June 26, 2018 4:49 PM
To: TRNSYS users mailing list at OneBuilding.org
Cc: hotline
Subject: Re: [TRNSYS-users] parametric study in buildings 

 

Hey,

 

Batch programming is a programming paradigm that allows automated execution
of certain commands at the level of an operating system. A batch file is a
“batch” of such commands. If it is called with the command line, the system
executes each individual task listed there one after the other. That's why
the term batch processing is common.

 

Here is an super simple example of a batch file which calls a Trnsys
template:

*	open an editor and type in the following line:
c:\TRNSYS18\TrnEXE64.exe
c:\TRNSYS18\Examples\3D_Building\6_Step_Add_Daylight\Building.dck
*	save as *.bat
*	double click on the *.bat file an the simulation should start

 

When you want to run several simulations in series or parallel you can add
it into this batch file. Please have a look in further literature.

 

best,

Christoph

 

Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im
Auftrag von Oussama Ibrahim via TRNSYS-users
Gesendet: Dienstag, 26. Juni 2018 12:33
An: TRNSYS users mailing list at OneBuilding.org
<trnsys-users at lists.onebuilding.org>
Cc: Oussama Ibrahim <oibrahimul at hotmail.com>
Betreff: Re: [TRNSYS-users] parametric study in buildings

 

Dear Christoph,

 

Thanks for your answer. I needed a confirmation for that.

 

But, may you please, explain to me what is a batch and how to run it?

 

Thanks in advance,

 

Oussama

----
Oussama Ibrahim
Lebanese University 
Tel: 961-70-818470 
E-mail: oibrahimul at hotmail.com ; oibrahim1984 at gmail.com 

 

  _____  

From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> on behalf of
hotline via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Sent: Tuesday, June 26, 2018 1:01 PM
To: TRNSYS users mailing list at OneBuilding.org
Cc: hotline
Subject: Re: [TRNSYS-users] parametric study in buildings 

 

Dear all,

 

Unfortunately there is no such possibility to do this in the Trnsys17
environment automatically. In my understanding the easiest way for you, is
to create a number of  .bui files with different window areas (Yossef
already described it – thx for that) and then run it with a batch.

 

Best,

Christoph

 

Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im
Auftrag von Yossef Ibrahimi via TRNSYS-users
Gesendet: Dienstag, 26. Juni 2018 11:57
An: Oussama Ibrahim via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Cc: Yossef Ibrahimi <yossefibrahimi at yahoo.com>
Betreff: Re: [TRNSYS-users] parametric study in buildings

 

I think that if you are looking to modify the WWR, you have to modify the
window AND the wall areas in order to get the same total area as before the
modification.

It's possible in TRNSYS 17 by modifying the .b17 file manually or with a
script (matlab, python...).

 

Le mardi 26 juin 2018 à 07:50:14 UTC+1, Oussama Ibrahim via TRNSYS-users
<trnsys-users at lists.onebuilding.org> a écrit : 

 

 

Hello every one,

 

I am trying to perform parametric study in buildings, where one of the
parameters is the windows to wall ratio (WWR). I am defining the area of the
walls and I intend to change the area of windows, thus, the area of the
window is the parameter under consideration.

 

Does anyone have an idea if this possible using Trnsys17.

 

Thanks in advance,

 

Oussama

----
Oussama Ibrahim
Lebanese University 
Tel: 961-70-818470 
E-mail: oibrahimul at hotmail.com ; oibrahim1984 at gmail.com 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180628/732385ce/attachment.htm>


More information about the TRNSYS-users mailing list