[TRNSYS-users] Fw: RE: Help me please (TRNSYS)

[S.O.Daei.N]

 Hi,

I want to model actual installation of the system in picture 1 in TRNSYS and my cycle is in photo number 2. i think in TRNSYS instead of the cycle i should use the geothermal heat pump (water to water or water to air), I want to use this cycle that I modeling and I want to compare the Experimental results and the theory results, please help me in modeling the cycle in TRNSYS.

As you know, the geothermal heat pump needs a catalog and performance data for the simulation to be defined as an input to this component (total, sensible, power). How can I determine these values form an Experimental project(picture 1)?

Is the third image attached to email simulated this cycle properly in the TRNSYS software base on picture 1 and my cycle?

Thanks a lot
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180627/2ad44eb8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1.jpg
Type: image/jpeg
Size: 851818 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180627/2ad44eb8/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2.png
Type: image/png
Size: 348784 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180627/2ad44eb8/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 3.jpg
Type: image/jpeg
Size: 48382 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180627/2ad44eb8/attachment-0003.jpg>