[TRNSYS-users] bug in battery component

Egon Troch egon at think-e.be
Tue Jul 3 00:56:25 PDT 2018


Thank you Jef for your quick respons. However, isn’t it the other way around? If an input is unconnected, “string” should be checked and the default is used. But if it is connected, shouldn’t the input that is selected be used? Or is it the other way around and does “string” need to be selected when an input is connected?

Kind regards,
Egon

From: Jeff Thornton <thornton at tess-inc.com>
Sent: Monday, 2 July 2018 16:15
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Egon Troch <egon at think-e.be>; Leen Peeters <Leen at think-e.be>
Subject: Re: [TRNSYS-users] bug in battery component

Changing units of an input only changes the value of any UNCONNECTED input.  Connected inputs are always assumed to be the default units that the component expects.

Jeff
Sent from my iPhone

On Jun 29, 2018, at 11:05 AM, Egon Troch via TRNSYS-users <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>> wrote:
Hi,

I found a bug in the TRNSYS 17 battery component “Type 47a”.

When changing the unit of the input “power to or from battery” to “kW” it still reads the input as if it were kJ/hr. This results in an unrealistic state of charge as if the battery is much too large.

If any questions, don’t hesitate to ask!

Kind regards,
Egon

<image001.png>
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180703/57fce816/attachment.htm>


More information about the TRNSYS-users mailing list