[TRNSYS-users] bug in battery component

Jeff Thornton thornton at tess-inc.com
Mon Jul 2 07:15:22 PDT 2018


Changing units of an input only changes the value of any UNCONNECTED input.  Connected inputs are always assumed to be the default units that the component expects.

Jeff

Sent from my iPhone

> On Jun 29, 2018, at 11:05 AM, Egon Troch via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hi,
>  
> I found a bug in the TRNSYS 17 battery component “Type 47a”.
>  
> When changing the unit of the input “power to or from battery” to “kW” it still reads the input as if it were kJ/hr. This results in an unrealistic state of charge as if the battery is much too large.
>  
> If any questions, don’t hesitate to ask!
>  
> Kind regards,
> Egon
>  
> <image001.png>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180702/58a57cef/attachment-0001.html>


More information about the TRNSYS-users mailing list