[TRNSYS-users] TESS Type 534 version with Plug-in

Jeff Thornton thornton at tess-inc.com
Tue Jan 30 07:01:24 PST 2018


Simon,

Make sure the node numbers for the inlet and outlet ports are within the range you set by the "Number of Tank Nodes" parameter. That's usually the problem.

Jeff/TESS

Sent from my iPhone

> On Jan 30, 2018, at 8:12 AM, Simon Martinez via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Dear all,
> 
> I'm trying to use Type 534 from TESS library to model a cyclindrical storage tank. I manage to define input/output for 1 heat exchanger but when I add a "port" I get this error : 
> 
> "The TRNSYS TYPE checking routine has found an inconstency in the specified component between the finput file dans the information expected by the Type
> 
> Reported information : An illegal PARAMETER value has been reported by the model. The model has reported that Parameter 35 is the problem - but this may not be the case. Please check the component configuration"
> 
> Any suggestion ?
> 
> Best regards
> 
> -- 
> Simon Martinez 
> Doctorant en micro-cogénération solaire 
> Laboratoire des Sciences de l'Ingénieur pour l'Environnement (LaSIE) 
> simon.martinez at univ-lr.fr 
> Tél : 06 17 15 76 64 
> 
> Université de La Rochelle 
> 23 avenue Albert Einstein 
> BP 33060 - 17031 La Rochelle 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180130/1fd2f216/attachment.htm>


More information about the TRNSYS-users mailing list