[TRNSYS-users] TESS Type 534 version with Plug-in

[Simon Martinez]

Dear all,

I'm trying to use Type 534 from TESS library to model a cyclindrical 
storage tank. I manage to define input/output for 1 heat exchanger but 
when I add a "port" I get this error :

/"The TRNSYS TYPE checking routine has found an inconstency in the 
specified component between the finput file dans the information 
expected by the Type

Reported information : An illegal PARAMETER value has been reported by 
the model. The model has reported that Parameter 35 is the problem - but 
this may not be the case. Please check the component configuration"/

Any suggestion ?

Best regards

-- 

Simon Martinez
Doctorant en micro-cogénération solaire
Laboratoire des Sciences de l'Ingénieur pour l'Environnement (LaSIE)
simon.martinez at univ-lr.fr
Tél : 06 17 15 76 64

Université de La Rochelle
23 avenue Albert Einstein
BP 33060 - 17031 La Rochelle

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180130/9ebc9e9a/attachment.html>