[TRNSYS-users] TRNBuild3D

[Zahra Naghibi]

Dear Marius,

I had the same problem. On that case, I found that the versions of TRNSYS
and Transys3d that I was using were not compatible.
Try to use trnsys3d through this directory:
C:\Trnsys17\Tools

Bests,
-- Zahra Naghibi
PhD Student of University of Windsor

On Wed, Jan 17, 2018 at 11:53 AM, Marius Poyard via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> I used the “new zone” button but it doesn’t work as well
>
>
>
> *Marius Poyard*
>
> *07-69-69-20-22*
>
> *Etudiant en 5e année de maitrise en génie mécanique – Université de
> Sherbrooke*
>
> *Etudiant ECAM Lyon 5e année*
>
>
>
> *De :* TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] *De
> la part de* Wirich FREPPEL via TRNSYS-users
> *Envoyé :* mercredi 17 janvier 2018 01:57
> *À :* Marius Poyard via TRNSYS-users <trnsys-users at lists.onebuilding.org>
> *Cc :* Wirich FREPPEL <freppelw at noirot.fr>
> *Objet :* Re: [TRNSYS-users] TRNBuild3D
>
>
>
> Dear Marius,
>
> I just tried and did mistakes on purpose in order to obtain the same
> error. I get the same one when I draw a building without creating a new
> TRNSYS zone before.
>
> In SketchUP, before drawing a building, you must create a new zone tool (a
> blue empty box appears). You'll find this option in the TRNSYS3D plugin
> tool. Then double click on the cross located in a corner of the newly
> created box (click somewhere outside the box and you will see it, it's a
> black cross). Now the new zone appears in dash lines. You can create your
> building within the zone.
>
> After that, do the same as you did and it should work.
>
> Regards
>
> Wirich FREPPEL
>
> Ingenieur Doctorant en Recherche & Developpement
>
> Centre R&D de Noirot - Groupe Muller
>
> 8 rue Louis Ampere, 02030 Laon
>
> +33 (0)3 23 27 31 99 <+33%203%2023%2027%2031%2099>
>
> Le 17/01/2018 à 01:02, Marius Poyard via TRNSYS-users a écrit :
>
> I launch Simulation Studio, i create a new project, i click on « 3D
> Building Project(multizone) » and after, when i have to choose the idf
> file, i select it a the right location. And when i click on « open », it
> load during 2 seconds and i have a pop up window with writen : « no
> Output’s specified / please add at least one output »
>
>
>
> Thanks for your help
>
>
> ------------------------------
>
> *De :* TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org>
> <trnsys-users-bounces at lists.onebuilding.org> de la part de Wirich via
> TRNSYS-users <trnsys-users at lists.onebuilding.org>
> <trnsys-users at lists.onebuilding.org>
> *Envoyé :* Tuesday, January 16, 2018 3:07:30 PM
> *À :* TRNSYS users mailing list at OneBuilding.org
> *Cc :* freppelw at noirot.fr
> *Objet :* Re: [TRNSYS-users] TRNBuild3D
>
>
>
> Dear Marius,
>
> Can you detail at which step you get this error message?
>
> Regards
>
> Wirich
>
> Le 2018-01-16 20:47, Marius Poyard via TRNSYS-users a écrit :
> > Hello
> >
> > I’m just starting to work ON TRNSYS and i’doing some tutorials.
> >
> > I tried to make a very simple house geometry : a cube, on SketchUp
> > with the TRNBuild3D extension. But when i use the .idf file in TRNSYS,
> > i had the message « no Output’s specified / please add at least one
> > output ».
> >
> > I can’t find anything explaining what are these outputs or how to
> > create them.
> >
> > Thnaks for your help
> >
> > Marius
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at lists.onebuilding.org
> > http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
>
> _______________________________________________
>
> TRNSYS-users mailing list
>
> TRNSYS-users at lists.onebuilding.org
>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180117/d8dcefb1/attachment.htm>