[TRNSYS-users] TRNBuild3D

[Marius Poyard]

I used the "new zone" button but it doesn't work as well

Marius Poyard
07-69-69-20-22
Etudiant en 5e année de maitrise en génie mécanique - Université de Sherbrooke
Etudiant ECAM Lyon 5e année

De : TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] De la part de Wirich FREPPEL via TRNSYS-users
Envoyé : mercredi 17 janvier 2018 01:57
À : Marius Poyard via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Cc : Wirich FREPPEL <freppelw at noirot.fr>
Objet : Re: [TRNSYS-users] TRNBuild3D


Dear Marius,

I just tried and did mistakes on purpose in order to obtain the same error. I get the same one when I draw a building without creating a new TRNSYS zone before.

In SketchUP, before drawing a building, you must create a new zone tool (a blue empty box appears). You'll find this option in the TRNSYS3D plugin tool. Then double click on the cross located in a corner of the newly created box (click somewhere outside the box and you will see it, it's a black cross). Now the new zone appears in dash lines. You can create your building within the zone.

After that, do the same as you did and it should work.

Regards

Wirich FREPPEL

Ingenieur Doctorant en Recherche & Developpement

Centre R&D de Noirot - Groupe Muller

8 rue Louis Ampere, 02030 Laon

+33 (0)3 23 27 31 99
Le 17/01/2018 à 01:02, Marius Poyard via TRNSYS-users a écrit :

I launch Simulation Studio, i create a new project, i click on « 3D Building Project(multizone) » and after, when i have to choose the idf file, i select it a the right location. And when i click on « open », it load during 2 seconds and i have a pop up window with writen : « no Output's specified / please add at least one output »



Thanks for your help



________________________________
De : TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org><mailto:trnsys-users-bounces at lists.onebuilding.org> de la part de Wirich via TRNSYS-users <trnsys-users at lists.onebuilding.org><mailto:trnsys-users at lists.onebuilding.org>
Envoyé : Tuesday, January 16, 2018 3:07:30 PM
À : TRNSYS users mailing list at OneBuilding.org
Cc : freppelw at noirot.fr<mailto:freppelw at noirot.fr>
Objet : Re: [TRNSYS-users] TRNBuild3D

Dear Marius,

Can you detail at which step you get this error message?

Regards

Wirich

Le 2018-01-16 20:47, Marius Poyard via TRNSYS-users a écrit :
> Hello
>
> I'm just starting to work ON TRNSYS and i'doing some tutorials.
>
> I tried to make a very simple house geometry : a cube, on SketchUp
> with the TRNBuild3D extension. But when i use the .idf file in TRNSYS,
> i had the message « no Output's specified / please add at least one
> output ».
>
> I can't find anything explaining what are these outputs or how to
> create them.
>
> Thnaks for your help
>
> Marius
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org




_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>

http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180117/70d0a9fd/attachment.htm>