TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, LLC, Madison Wisconsin, USA
Release 17.02.0005
Listing file for: "C:\Trnsys17\MyProjects\Project23\Abgabe-geregelte Pumpen-neue-Kollektoren-mit-Rohren.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Trnsys17\Exe"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 17
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on Dienstag, Februar 27, 2018 at 21:05
*** from TrnsysStudio project: C:\Trnsys17\MyProjects\Project23\Abgabe-geregelte Pumpen-neue-Kollektoren-mit-Rohren.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=0
STOP=8760
STEP=1
! Start time End time Time step
SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00
! Integration Convergence
TOLERANCES 4.0000000000000010E-03 4.0000000000000010E-03
! Max iterations Max warnings Trace limit
LIMITS 30 20000 51
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 80
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* User defined CONSTANTS
* Model "Teiler" (Type 11)
*
UNIT 6 TYPE 11
*$UNIT_NAME Teiler
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 145 560
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Rohr innen aus:Outlet temperature ->Inlet temperature
! Rohr innen aus:Outlet flow rate ->Inlet flow rate
! [unconnected] Control signal
65,1 65,2 CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "Mixer" (Type 11)
*
UNIT 7 TYPE 11
*$UNIT_NAME Mixer
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 1122 189
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Rohr außen ein 1:Outlet temperature ->Temperature at inlet 1
! Rohr außen ein 1:Outlet flow rate ->Flow rate at inlet 1
! Rohr außen ein 2:Outlet temperature ->Temperature at inlet 2
! Rohr außen ein 2:Outlet flow rate ->Flow rate at inlet 2
66,1 66,2 67,1 67,2
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Kollektortemperatur"
*
EQUATIONS 1
Kollektorschutz = max([61,1],[62,1])
*$UNIT_NAME Kollektortemperatur
*$LAYER Main
*$POSITION 690 1213
*------------------------------------------------------------------------------
* Model "Solarwärmeübertrager" (Type 5)
*
UNIT 14 TYPE 5
*$UNIT_NAME Solarwärmeübertrager
*$MODEL .\Heat Exchangers\Counter Flow\Type5b.tmf
*$POSITION 897 660
*$LAYER Main #
PARAMETERS 4
! 1 Counter flow mode
! 2 Specific heat of source side fluid
! 3 Specific heat of load side fluid
! 4 Not used
2.0000000000000000E+00 3.7900000000000000E+00 4.1899999999999995E+00 0.0000000000000000E+00
INPUTS 5
! Rohr innen ein:Outlet temperature ->Source side inlet temperature
! Rohr innen ein:Outlet flow rate ->Source side flow rate
! Ladepumpe:Outlet fluid temperature ->Load side inlet temperature
! Ladepumpe:Outlet flow rate ->Load side flow rate
! [unconnected] Overall heat transfer coefficient of exchanger
68,1 68,2 39,1 39,2 CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 7.3871998042999985E+04
*------------------------------------------------------------------------------
* Model "Schichtenspeicher" (Type 340)
*
UNIT 22 TYPE 340
*$UNIT_NAME Schichtenspeicher
*$MODEL .\Thermal Storage\Schichtenspeicher\Type340\type340.tmf
*$POSITION 1286 488
*$LAYER Main #
*$#
*$# internal electrical heater.
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
PARAMETERS 126
! 1 storage height
! 2 storage volume
! 3 specific heat capacity of the fluid in the store
! 4 density of the fliud in the store
! 5 effective vertical thermal conductivity in the store
! 6 not used
! 7 initial temerpature of the whole store
! 8 heat loss capacity rate through bottom of the store
! 9 heat loss capacity rate through the top of the store
! 10 dz1 if dz1>0: relative length if the first zone with (UA)s,a1 il dzl<0 and (P8,9,12,..16)=0 : (UA)s,al is used for the whole store
! 11 (UA)s,a1 heat loss capacity rate of the store through the first zone (dz1) of the store mantle
! 12 dz2 relative length of second zone with (UA)s,a2
! 13 (UA)s,a2 heat loss capacity rate of the store through the first zone (dz2) of the store mantle
! 14 dz3 relative length of second zone with (UA)s,a3
! 15 (UA)s,a3 heat loss capacity rate of the store through the first zone (dz3) of the store mantle
! 16 (UA)s,a4 heat loss capacity rate from the store through the zone of the store-mantale with the relative length dz4=1-dz1-dz2-dz3
! 17 rel. height of inlet postition from double port -1
! 18 rel. heigth of outlet position from double port-1
! 19 additional parameter of double port (not used)-1
! 20 csd =1 for stratified charging with double port-1
! 21 rel. height of inlet postition from double port -2
! 22 rel. heigth of outlet position from double port-2
! 23 additional parameter of double port (not used)-2
! 24 csd =1 for stratified charging with double port-2
! 25 rel. height of inlet postition from double port -3
! 26 rel. heigth of outlet position from double port-3
! 27 additional parameter of double port (not used)-3
! 28 csd =1 for stratified charging with double port-3
! 29 rel. height of inlet postition from double port -4
! 30 rel. heigth of outlet position from double port-4
! 31 additional parameter of double port (not used)-4
! 32 csd =1 for stratified charging with double port-4
! 33 rel. height of inlet postition from double port -5
! 34 rel. heigth of outlet position from double port-5
! 35 additional parameter of double port (not used)-5
! 36 csd =1 for stratified charging with double port-5
! 37 rel. height of inlet postition from double port -6
! 38 rel. heigth of outlet position from double port-6
! 39 additional parameter of double port (not used)-6
! 40 csd =1 for stratified charging with double port-6
! 41 rel. height of inlet postition from double port -7
! 42 rel. heigth of outlet position from double port-7
! 43 additional parameter of double port (not used)-7
! 44 csd =1 for stratified charging with double port-7
! 45 rel. height of inlet postition from double port -8
! 46 rel. heigth of outlet position from double port-8
! 47 additional parameter of double port (not used)-8
! 48 csd =1 for stratified charging with double port-8
! 49 rel. height of inlet postition from double port -9
! 50 rel. heigth of outlet position from double port-9
! 51 additional parameter of double port (not used)-9
! 52 csd =1 for stratified charging with double port-9
! 53 rel. height of inlet postition from double port -10
! 54 rel. heigth of outlet position from double port-10
! 55 additional parameter of double port (not used)-10
! 56 csd =1 for stratified charging with double port-10
! 57 rel. position of temperature sensor-1
! 58 rel. position of temperature sensor-2
! 59 rel. position of temperature sensor-3
! 60 rel. position of temperature sensor-4
! 61 rel. position of temperature sensor-5
! 62 HMOD auxiliary heater mode 0,,,none (the P38-P43 not used) 1,,,Paux variable 2,,,Paux constant
! 63 HTOP heater install mode if =1 the auxiliary heater is installed from the top, else installed from the side
! 64 abs. length of auxiliary heater (only if HTOP=1)
! 65 rel. position where aux. heater is installed (Only if HTOP not equal 1)
! 66 rel. position fo temperature controller for aux. heater
! 67 set temperature of the controller for aux. heater(only if HMOD=2)
! 68 dead band temperature difference of the controller (only if HMOD=2)
! 69 rel. inlet position of the heat exchanger(0...1)-1
! 70 rel. outlet position of the heat exchanger(0...1)-1
! 71 volume of heat exchanger-1
! 72 spec.heat capacity of the fluid in the heat exchanger-1
! 73 densitiy of the fluid in the heatexchanger-1
! 74 (UA)h,s heat transfere capacity rate from the heat exchange to the store-1
! 75 1. parameter for the calculation of (UA)h,s-1
! 76 2. parameter for the calculation of (UA)h,s-1
! 77 3. parameter for the calculation of (UA)h,s-1
! 78 (UA)hl,a heat loss capacity rate from the heat exchanger to ambient-1
! 79 sch1 stratified charging with heat exchanger if sch1=1 sch1=2-1
! 80 factor of secondary mass flow rate (only if sch1=2)-1
! 81 fractor for temperature dependency of (UA)h,s-1
! 82 rel. inlet position of the heat exchanger(0...1)-2
! 83 rel. outlet position of the heat exchanger(0...1)-2
! 84 volume of heat exchanger-2
! 85 spec.heat capacity of the fluid in the heat exchanger-2
! 86 densitiy of the fluid in the heatexchanger-2
! 87 (UA)h,s heat transfere capacity rate from the heat exchange to the store-2
! 88 1. parameter for the calculation of (UA)h,s-2
! 89 2. parameter for the calculation of (UA)h,s-2
! 90 3. parameter for the calculation of (UA)h,s-2
! 91 (UA)hl,a heat loss capacity rate from the heat exchanger to ambient-2
! 92 sch1 stratified charging with heat exchanger if sch1=1 sch1=2-2
! 93 factor of secondary mass flow rate (only if sch1=2)-2
! 94 fractor for temperature dependency of (UA)h,s-2
! 95 rel. inlet position of the heat exchanger(0...1)-3
! 96 rel. outlet position of the heat exchanger(0...1)-3
! 97 volume of heat exchanger-3
! 98 spec.heat capacity of the fluid in the heat exchanger-3
! 99 densitiy of the fluid in the heatexchanger-3
! 100 (UA)h,s heat transfere capacity rate from the heat exchange to the store-3
! 101 1. parameter for the calculation of (UA)h,s-3
! 102 2. parameter for the calculation of (UA)h,s-3
! 103 3. parameter for the calculation of (UA)h,s-3
! 104 (UA)hl,a heat loss capacity rate from the heat exchanger to ambient-3
! 105 sch1 stratified charging with heat exchanger if sch1=1 sch1=2-3
! 106 factor of secondary mass flow rate (only if sch1=2)-3
! 107 fractor for temperature dependency of (UA)h,s-3
! 108 rel. inlet position of the heat exchanger(0...1)-4
! 109 rel. outlet position of the heat exchanger(0...1)-4
! 110 volume of heat exchanger-4
! 111 spec.heat capacity of the fluid in the heat exchanger-4
! 112 densitiy of the fluid in the heatexchanger-4
! 113 (UA)h,s heat transfere capacity rate from the heat exchange to the store-4
! 114 1. parameter for the calculation of (UA)h,s-4
! 115 2. parameter for the calculation of (UA)h,s-4
! 116 3. parameter for the calculation of (UA)h,s-4
! 117 (UA)hl,a heat loss capacity rate from the heat exchanger to ambient-4
! 118 sch1 stratified charging with heat exchanger if sch1=1 sch1=2-4
! 119 factor of secondary mass flow rate (only if sch1=2)-4
! 120 fractor for temperature dependency of (UA)h,s-4
! 121 accuracy for calculating the temperatures
! 122 accuracy of temperature-dependence of (UA)*hx,s
! 123 precision of the mixing process in the store
! 124 flag, if the temperature-dependence timestep control is used (1=yes)
! 125 number of nodes for the store (Nmax<200)
! 126 emulation of former versions (number of version) latest: 'ver=0' or 'ver=-7', fitting mode if 'ver' is negative
5.4900000000000002E+00 1.2000000000000000E+01 4.1899999999999995E+00 9.9241999999999996E+02 4.4900000000000002E+00
0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+00
6.9119999999999999E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000001E-01 5.0000000000000010E-02 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000001E-01 9.8999999999999999E-01 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000001E-01
5.0000000000000000E-01 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000001E-01 5.0000009999999995E-01
0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000001E-01 9.9000000099999996E-01 0.0000000000000000E+00
1.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
-1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+00
-1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 9.6999999999999997E-01 7.5000000000000011E-01 5.0000000000000000E-01 2.5000000000000000E-01
5.0000000000000010E-02 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 5.0000000000000000E-01
6.0000000000000009E-01 0.0000000000000000E+00 2.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00
5.0000000000000010E-03 4.1799999999999997E+00 9.9241999999999996E+02 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 6.0000000000000009E-01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 5.0000000000000010E-03 4.1799999999999997E+00
9.9241999999999996E+02 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000009E-01
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 -1.0000000000000000E+00
-1.0000000000000000E+00 5.0000000000000010E-03 4.1799999999999997E+00 9.9241999999999996E+02 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000009E-01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 5.0000000000000010E-03
4.1799999999999997E+00 9.9241999999999996E+02 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
6.0000000000000009E-01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000002E-03 0.0000000000000000E+00 1.0000000000000000E+03 0.0000000000000000E+00 1.9000000000000000E+02
0.0000000000000000E+00
INPUTS 30
! Solarwärmeübertrager:Load side outlet temperature ->inlet temperature of double port-1
! Solarwärmeübertrager:Load side flow rate ->fluid flow rate of double port-1
! Pumpe (WWB K):Outlet fluid temperature ->inlet temperature of double port-2
! Pumpe (WWB K):Outlet flow rate ->fluid flow rate of double port-2
! Pumpe (H):Outlet fluid temperature ->inlet temperature of double port-3
! Pumpe (H):Outlet flow rate ->fluid flow rate of double port-3
! Pumpe (K):Outlet fluid temperature ->inlet temperature of double port-4
! Pumpe (K):Outlet flow rate ->fluid flow rate of double port-4
! Pumpe (WWB SW):Outlet fluid temperature ->inlet temperature of double port-5
! Pumpe (WWB SW):Outlet flow rate ->fluid flow rate of double port-5
! [unconnected] inlet temperature of double port-6
! [unconnected] fluid flow rate of double port-6
! [unconnected] inlet temperature of double port-7
! [unconnected] fluid flow rate of double port-7
! [unconnected] inlet temperature of double port-8
! [unconnected] fluid flow rate of double port-8
! [unconnected] inlet temperature of double port-9
! [unconnected] fluid flow rate of double port-9
! [unconnected] inlet temperature of double port-10
! [unconnected] fluid flow rate of double port-10
! [unconnected] inlet temperature of heat exchanger-1
! [unconnected] fluid flow rate of heat exchanger-1
! [unconnected] inlet temperature of heat exchanger-2
! [unconnected] fluid flow rate of heat exchanger-2
! [unconnected] inlet temperature of heat exchanger-3
! [unconnected] fluid flow rate of heat exchanger-3
! [unconnected] inlet temperature of heat exchanger-4
! [unconnected] fluid flow rate of heat exchanger-4
! [unconnected] ambient temperature
! [unconnected] auxiliary heater input
14,3 14,4 37,1 37,2 48,1
48,2 57,1 57,2 52,1 52,2
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01
0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00
1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01
0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00
1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01
0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Pumpensignal (H)"
*
EQUATIONS 3
SignalH = min([43,1],[45,5])
MassenstromHPK = [45,6]/82883.22
SignalPK = EQL(SignalH,0)*0+(1-EQL(SignalH,0))*MassenstromHPK
*$UNIT_NAME Pumpensignal (H)
*$LAYER Main
*$POSITION 1836 400
*------------------------------------------------------------------------------
* Model "Controller (H)" (Type 2)
*
UNIT 43 TYPE 2 (H)
*$UNIT_NAME Controller (H)
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 1830 296
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+04
INPUTS 6
! Schichtenspeicher:temperature at sensor-3 ->Upper input temperature Th
! BSU H:TempH ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
22,48 TEMPH CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 8.8000000000000007E+00 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00
4.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Temperaturen" (Type 9)
*
UNIT 44 TYPE 9
*$UNIT_NAME Temperaturen
*$MODEL .\Utility\Data Readers\Generic Data Files\Expert Mode\Free Format\Type9e.tmf
*$POSITION 2373 723
*$LAYER Main #
PARAMETERS 90
! 1 Mode
! 2 Header Lines to Skip
! 3 No. of values to read
! 4 Time interval of data
! 5 Interpolate or not-1
! 6 Multiplication factor-1
! 7 Addition factor-1
! 8 Average or instantaneous value-1
! 9 Interpolate or not-2
! 10 Multiplication factor-2
! 11 Addition factor-2
! 12 Average or instantaneous value-2
! 13 Interpolate or not-3
! 14 Multiplication factor-3
! 15 Addition factor-3
! 16 Average or instantaneous value-3
! 17 Interpolate or not-4
! 18 Multiplication factor-4
! 19 Addition factor-4
! 20 Average or instantaneous value-4
! 21 Interpolate or not-5
! 22 Multiplication factor-5
! 23 Addition factor-5
! 24 Average or instantaneous value-5
! 25 Interpolate or not-6
! 26 Multiplication factor-6
! 27 Addition factor-6
! 28 Average or instantaneous value-6
! 29 Interpolate or not-7
! 30 Multiplication factor-7
! 31 Addition factor-7
! 32 Average or instantaneous value-7
! 33 Interpolate or not-8
! 34 Multiplication factor-8
! 35 Addition factor-8
! 36 Average or instantaneous value-8
! 37 Interpolate or not-9
! 38 Multiplication factor-9
! 39 Addition factor-9
! 40 Average or instantaneous value-9
! 41 Interpolate or not-10
! 42 Multiplication factor-10
! 43 Addition factor-10
! 44 Average or instantaneous value-10
! 45 Interpolate or not-11
! 46 Multiplication factor-11
! 47 Addition factor-11
! 48 Average or instantaneous value-11
! 49 Interpolate or not-12
! 50 Multiplication factor-12
! 51 Addition factor-12
! 52 Average or instantaneous value-12
! 53 Interpolate or not-13
! 54 Multiplication factor-13
! 55 Addition factor-13
! 56 Average or instantaneous value-13
! 57 Interpolate or not-14
! 58 Multiplication factor-14
! 59 Addition factor-14
! 60 Average or instantaneous value-14
! 61 Interpolate or not-15
! 62 Multiplication factor-15
! 63 Addition factor-15
! 64 Average or instantaneous value-15
! 65 Interpolate or not-16
! 66 Multiplication factor-16
! 67 Addition factor-16
! 68 Average or instantaneous value-16
! 69 Interpolate or not-17
! 70 Multiplication factor-17
! 71 Addition factor-17
! 72 Average or instantaneous value-17
! 73 Interpolate or not-18
! 74 Multiplication factor-18
! 75 Addition factor-18
! 76 Average or instantaneous value-18
! 77 Interpolate or not-19
! 78 Multiplication factor-19
! 79 Addition factor-19
! 80 Average or instantaneous value-19
! 81 Interpolate or not-20
! 82 Multiplication factor-20
! 83 Addition factor-20
! 84 Average or instantaneous value-20
! 85 Interpolate or not-21
! 86 Multiplication factor-21
! 87 Addition factor-21
! 88 Average or instantaneous value-21
! 89 Logical unit for input file
! 90 Free format mode
3.0000000000000000E+00 1.0000000000000000E+00 2.1000000000000000E+01 1.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 4.1000000000000000E+01 -1.0000000000000000E+00
*** External files
ASSIGN \\Mac\Dropbox\Masterarbeit\Solarthermie\Loads\Type9e\TRNSYS Temperaturen.txt 41
*|? Input file name |1000
*------------------------------------------------------------------------------
* Model "Pumpen" (Type 9)
*
UNIT 45 TYPE 9
*$UNIT_NAME Pumpen
*$MODEL .\Utility\Data Readers\Generic Data Files\Expert Mode\Free Format\Type9e.tmf
*$POSITION 2408 616
*$LAYER Main #
PARAMETERS 70
! 1 Mode
! 2 Header Lines to Skip
! 3 No. of values to read
! 4 Time interval of data
! 5 Interpolate or not-1
! 6 Multiplication factor-1
! 7 Addition factor-1
! 8 Average or instantaneous value-1
! 9 Interpolate or not-2
! 10 Multiplication factor-2
! 11 Addition factor-2
! 12 Average or instantaneous value-2
! 13 Interpolate or not-3
! 14 Multiplication factor-3
! 15 Addition factor-3
! 16 Average or instantaneous value-3
! 17 Interpolate or not-4
! 18 Multiplication factor-4
! 19 Addition factor-4
! 20 Average or instantaneous value-4
! 21 Interpolate or not-5
! 22 Multiplication factor-5
! 23 Addition factor-5
! 24 Average or instantaneous value-5
! 25 Interpolate or not-6
! 26 Multiplication factor-6
! 27 Addition factor-6
! 28 Average or instantaneous value-6
! 29 Interpolate or not-7
! 30 Multiplication factor-7
! 31 Addition factor-7
! 32 Average or instantaneous value-7
! 33 Interpolate or not-8
! 34 Multiplication factor-8
! 35 Addition factor-8
! 36 Average or instantaneous value-8
! 37 Interpolate or not-9
! 38 Multiplication factor-9
! 39 Addition factor-9
! 40 Average or instantaneous value-9
! 41 Interpolate or not-10
! 42 Multiplication factor-10
! 43 Addition factor-10
! 44 Average or instantaneous value-10
! 45 Interpolate or not-11
! 46 Multiplication factor-11
! 47 Addition factor-11
! 48 Average or instantaneous value-11
! 49 Interpolate or not-12
! 50 Multiplication factor-12
! 51 Addition factor-12
! 52 Average or instantaneous value-12
! 53 Interpolate or not-13
! 54 Multiplication factor-13
! 55 Addition factor-13
! 56 Average or instantaneous value-13
! 57 Interpolate or not-14
! 58 Multiplication factor-14
! 59 Addition factor-14
! 60 Average or instantaneous value-14
! 61 Interpolate or not-15
! 62 Multiplication factor-15
! 63 Addition factor-15
! 64 Average or instantaneous value-15
! 65 Interpolate or not-16
! 66 Multiplication factor-16
! 67 Addition factor-16
! 68 Average or instantaneous value-16
! 69 Logical unit for input file
! 70 Free format mode
3.0000000000000000E+00 1.0000000000000000E+00 1.6000000000000000E+01 1.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 4.2000000000000000E+01 -1.0000000000000000E+00
*** External files
ASSIGN \\Mac\Dropbox\Masterarbeit\Solarthermie\Loads\Type9e\TRNSYS Pumpen.txt 42
*|? Input file name |1000
*------------------------------------------------------------------------------
* Model "WÜ H" (Type 5)
*
UNIT 47 TYPE 5 H
*$UNIT_NAME WÜ H
*$MODEL .\Heat Exchangers\Counter Flow\Type5b.tmf
*$POSITION 1917 168
*$LAYER Main #
PARAMETERS 4
! 1 Counter flow mode
! 2 Specific heat of source side fluid
! 3 Specific heat of load side fluid
! 4 Not used
2.0000000000000000E+00 4.1899999999999995E+00 4.1899999999999995E+00 0.0000000000000000E+00
INPUTS 5
! Schichtenspeicher:outlet temperature of double port-3 ->Source side inlet temperature
! Schichtenspeicher:fluid flow rate of double port-3 ->Source side flow rate
! BSU H:TempH ->Load side inlet temperature
! BSU H:Aktiv ->Load side flow rate
! [unconnected] Overall heat transfer coefficient of exchanger
22,5 22,6 TEMPH AKTIV CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 8.8000000000000007E+00 0.0000000000000000E+00 7.0304398138000004E+04
*------------------------------------------------------------------------------
* Model "Wetter" (Type 15)
*
UNIT 30 TYPE 15
*$UNIT_NAME Wetter
*$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type15-2.tmf
*$POSITION 380 40
*$LAYER Weather - Data Files #
PARAMETERS 12
! 1 File Type
! 2 Logical unit
! 3 Tilted Surface Radiation Mode
! 4 Ground reflectance - no snow
! 5 Ground reflectance - snow cover
! 6 Number of surfaces
! 7 Tracking mode-1
! 8 Slope of surface-1
! 9 Azimuth of surface-1
! 10 Tracking mode-2
! 11 Slope of surface-2
! 12 Azimuth of surface-2
2.0000000000000000E+00 4.3000000000000000E+01 5.0000000000000000E+00 2.0000000000000001E-01 7.0000000000000007E-01
2.0000000000000000E+00 1.0000000000000000E+00 4.5000000000000000E+01 -2.5000000000000000E+01 1.0000000000000000E+00
4.5000000000000000E+01 4.0000000000000000E+01
*** External files
ASSIGN \\Mac\Dropbox\Masterarbeit\Solarthermie\Wetterdaten Meteonrom\Hamburg-Fuhlsbuettel-hour.tm2 43
*|? Which file contains the TMY-2 weather data? |1000
*------------------------------------------------------------------------------
* Model "Controller Energie" (Type 2)
*
UNIT 26 TYPE 2 Energie
*$UNIT_NAME Controller Energie
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 107 1043
*$LAYER Controls #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+04
INPUTS 6
! Kollektortemperatur:Kollektorschutz ->Upper input temperature Th
! Schichtenspeicher:temperature at sensor-5 ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
KOLLEKTORSCHUTZ 22,50 CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00
4.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Controller Speicher" (Type 2)
*
UNIT 27 TYPE 2 Speicher
*$UNIT_NAME Controller Speicher
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 107 1149
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+03
INPUTS 6
! [unconnected] Upper input temperature Th
! Solarwärmeübertrager:Load side outlet temperature ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
CONST CHUTZ 14,3 CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00 -9.0000000000000000E+01
-9.5000000000000000E+01
*------------------------------------------------------------------------------
* Model "Controller Kollektorschutz" (Type 2)
*
UNIT 32 TYPE 2 Kollektorschutz
*$UNIT_NAME Controller Kollektorschutz
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 115 1429
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+04
INPUTS 6
! [unconnected] Upper input temperature Th
! Kollektortemperatur:Kollektorschutz ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
CONST CHUTZ KOLLEKTORSCHUTZ CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 -1.8000000000000000E+02
-2.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "WÜ WWB K" (Type 5)
*
UNIT 33 TYPE 5 WWB K
*$UNIT_NAME WÜ WWB K
*$MODEL .\Heat Exchangers\Counter Flow\Type5b.tmf
*$POSITION 1797 1043
*$LAYER Main #
PARAMETERS 4
! 1 Counter flow mode
! 2 Specific heat of source side fluid
! 3 Specific heat of load side fluid
! 4 Not used
2.0000000000000000E+00 4.1899999999999995E+00 4.1899999999999995E+00 0.0000000000000000E+00
INPUTS 5
! Schichtenspeicher:outlet temperature of double port-2 ->Source side inlet temperature
! Schichtenspeicher:fluid flow rate of double port-2 ->Source side flow rate
! BSU (WWB K):TempWWBK ->Load side inlet temperature
! BSU (WWB K):AktivWWBK ->Load side flow rate
! [unconnected] Overall heat transfer coefficient of exchanger
22,3 22,4 TEMPWWBK AKTIVWWBK CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 5.9859999999999999E+01 0.0000000000000000E+00 5.0399998664999999E+04
*------------------------------------------------------------------------------
* EQUATIONS "BSU H"
*
EQUATIONS 2
Aktiv = GT(SignalH,0)*[45,6]+(1-GT(SignalH,0)*0)
TempH = [44,2]
*$UNIT_NAME BSU H
*$LAYER Main
*$POSITION 2206 168
*------------------------------------------------------------------------------
* Model "Controller (WWB K)" (Type 2)
*
UNIT 35 TYPE 2 (WWB K)
*$UNIT_NAME Controller (WWB K)
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 1741 1235
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+03
INPUTS 6
! Schichtenspeicher:temperature at sensor-1 ->Upper input temperature Th
! BSU (WWB K):TempWWBK ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
22,46 TEMPWWBK CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 5.9859999999999999E+01 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00
4.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Pumpensignal (WWB K)"
*
EQUATIONS 1
SignalWWBK = min([35,1],[45,15])
*$UNIT_NAME Pumpensignal (WWB K)
*$LAYER Main
*$POSITION 1739 1342
*------------------------------------------------------------------------------
* Model "Pumpe (WWB K)" (Type 114)
*
UNIT 37 TYPE 114 (WWB K)
*$UNIT_NAME Pumpe (WWB K)
*$MODEL .\Hydronics\Pumps\Single Speed\Type114.tmf
*$POSITION 1530 1049
*$LAYER Main #
*$# SINGLE-SPEED PUMP
PARAMETERS 4
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
3.0070000000000000E+03 4.1899999999999995E+00 2.6840000000000000E+03 0.0000000000000000E+00
INPUTS 5
! WÜ WWB K:Source side outlet temperature ->Inlet fluid temperature
! WÜ WWB K:Source side flow rate ->Inlet fluid flow rate
! Pumpensignal (WWB K):SignalWWBK ->Control signal
! [unconnected] Overall pump efficiency
! [unconnected] Motor efficiency
33,1 33,2 SIGNALWWBK CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Solarpumpe" (Type 110)
*
UNIT 38 TYPE 110
*$UNIT_NAME Solarpumpe
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 464 660
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
6.8400000000000000E+03 3.7900000000000000E+00 2.6840000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Solarwärmeübertrager:Source side outlet temperature ->Inlet fluid temperature
! Solarwärmeübertrager:Source side flow rate ->Inlet fluid flow rate
! Pumpensignal (S):new ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
14,1 14,2 NEW CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Pumpensignal (S)"
*
EQUATIONS 5
RegelungMassenstrom = GT(BegrenzungEinstrahlu,150)*(0.375+(0.625/700)*(BegrenzungEinstrahlu-150))+(1-GT(BegrenzungEinstrahlu,150))*0
BegrenzungEinstrahlu = GT([30,14],850)*850+(1-GT([30,14],850))*[30,14]
new = EQL(Min(Min([26,1],[27,1]),[32,1]),0)*0+(1-EQL(Min(Min([26,1],[27,1]),[32,1]),0))*RegelungMassenstrom
new1 = EQL(Min([26,1],[27,1]),0)*0+(1-EQL(Min([26,1],[27,1]),0))*RegelungMassenstrom
new2 = GT(Kollektorschutz,130)*0+(1-GT(Kollektorschutz,130))*1
*$UNIT_NAME Pumpensignal (S)
*$LAYER Main
*$POSITION 103 957
*------------------------------------------------------------------------------
* Model "Ladepumpe" (Type 110)
*
UNIT 39 TYPE 110
*$UNIT_NAME Ladepumpe
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 1021 827
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
6.1870000000000000E+03 3.7900000000000000E+00 2.6840000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Schichtenspeicher:outlet temperature of double port-1 ->Inlet fluid temperature
! Schichtenspeicher:fluid flow rate of double port-1 ->Inlet fluid flow rate
! Pumpensignal (S):new ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
22,1 22,2 NEW CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Pumpensignal (WWB SW)"
*
EQUATIONS 1
SignalWWBSW = min([51,1],[45,16])
*$UNIT_NAME Pumpensignal (WWB SW)
*$LAYER Main
*$POSITION 1719 1910
*------------------------------------------------------------------------------
* Model "WÜ WWB SW" (Type 5)
*
UNIT 50 TYPE 5 WWB SW
*$UNIT_NAME WÜ WWB SW
*$MODEL .\Heat Exchangers\Counter Flow\Type5b.tmf
*$POSITION 1777 1611
*$LAYER Main #
PARAMETERS 4
! 1 Counter flow mode
! 2 Specific heat of source side fluid
! 3 Specific heat of load side fluid
! 4 Not used
2.0000000000000000E+00 4.1899999999999995E+00 4.1899999999999995E+00 0.0000000000000000E+00
INPUTS 5
! Schichtenspeicher:outlet temperature of double port-5 ->Source side inlet temperature
! Schichtenspeicher:fluid flow rate of double port-5 ->Source side flow rate
! BSU (WWB SW):TempWWBSW ->Load side inlet temperature
! BSU (WWB SW):AktivWWBSW ->Load side flow rate
! [unconnected] Overall heat transfer coefficient of exchanger
22,9 22,10 TEMPWWBSW AKTIVWWBSW CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 6.1560000000000002E+01 0.0000000000000000E+00 2.0159999465899999E+05
*------------------------------------------------------------------------------
* Model "Controller (WWB SW)" (Type 2)
*
UNIT 51 TYPE 2 (WWB SW)
*$UNIT_NAME Controller (WWB SW)
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 1718 1803
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+03
INPUTS 6
! Schichtenspeicher:temperature at sensor-1 ->Upper input temperature Th
! BSU (WWB SW):TempWWBSW ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
22,46 TEMPWWBSW CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 6.1560000000000002E+01 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00
4.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Pumpe (WWB SW)" (Type 114)
*
UNIT 52 TYPE 114 (WWB SW)
*$UNIT_NAME Pumpe (WWB SW)
*$MODEL .\Hydronics\Pumps\Single Speed\Type114.tmf
*$POSITION 1497 1619
*$LAYER Main #
*$# SINGLE-SPEED PUMP
PARAMETERS 4
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
1.2029000000000000E+04 4.1899999999999995E+00 2.6840000000000000E+03 0.0000000000000000E+00
INPUTS 5
! WÜ WWB SW:Source side outlet temperature ->Inlet fluid temperature
! WÜ WWB SW:Source side flow rate ->Inlet fluid flow rate
! Pumpensignal (WWB SW):SignalWWBSW ->Control signal
! [unconnected] Overall pump efficiency
! [unconnected] Motor efficiency
50,1 50,2 SIGNALWWBSW CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "BSU (WWB SW)"
*
EQUATIONS 2
AktivWWBSW = GT(SignalWWBSW,0)*11544.45+(1-GT(SignalWWBSW,0))*0
TempWWBSW = [44,21]
*$UNIT_NAME BSU (WWB SW)
*$LAYER Main
*$POSITION 2108 1619
*------------------------------------------------------------------------------
* EQUATIONS "BSU (WWB K)"
*
EQUATIONS 2
AktivWWBK = GT(SignalWWBK,0)*2881.18+(1-GT(SignalWWBK,0))*0
TempWWBK = [44,20]
*$UNIT_NAME BSU (WWB K)
*$LAYER Main
*$POSITION 2087 1063
*------------------------------------------------------------------------------
* EQUATIONS "Pumpensignal (K)"
*
EQUATIONS 1
SignalK = min([55,1],[45,10])
*$UNIT_NAME Pumpensignal (K)
*$LAYER Main
*$POSITION 1854 833
*------------------------------------------------------------------------------
* Model "Controller (K)" (Type 2)
*
UNIT 55 TYPE 2 (K)
*$UNIT_NAME Controller (K)
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 1854 726
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+03
INPUTS 6
! Schichtenspeicher:outlet temperature of double port-4 ->Upper input temperature Th
! BSU (K):TempK ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! [unconnected] Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
22,7 TEMPK CONST W CONST CONST
CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 2.4899999999999999E+01 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00
4.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "BSU (K)"
*
EQUATIONS 2
AktivK = GT(SignalK,0)*55131.22+(1-GT(SignalK,0)*0)
TempK = [44,8]
*$UNIT_NAME BSU (K)
*$LAYER Main
*$POSITION 2109 573
*------------------------------------------------------------------------------
* Model "WÜ K" (Type 5)
*
UNIT 56 TYPE 5 K
*$UNIT_NAME WÜ K
*$MODEL .\Heat Exchangers\Counter Flow\Type5b.tmf
*$POSITION 1926 573
*$LAYER Main #
PARAMETERS 4
! 1 Counter flow mode
! 2 Specific heat of source side fluid
! 3 Specific heat of load side fluid
! 4 Not used
2.0000000000000000E+00 4.1899999999999995E+00 4.1899999999999995E+00 0.0000000000000000E+00
INPUTS 5
! Schichtenspeicher:outlet temperature of double port-4 ->Source side inlet temperature
! Schichtenspeicher:fluid flow rate of double port-4 ->Source side flow rate
! BSU (K):TempK ->Load side inlet temperature
! BSU (K):AktivK ->Load side flow rate
! [unconnected] Overall heat transfer coefficient of exchanger
22,7 22,8 TEMPK AKTIVK CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 2.4899999999999999E+01 0.0000000000000000E+00 4.6198798775999996E+04
*------------------------------------------------------------------------------
* Model "Pumpe (K)" (Type 114)
*
UNIT 57 TYPE 114 (K)
*$UNIT_NAME Pumpe (K)
*$MODEL .\Hydronics\Pumps\Single Speed\Type114.tmf
*$POSITION 1587 552
*$LAYER Main #
*$# SINGLE-SPEED PUMP
PARAMETERS 4
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
5.5130000000000000E+03 4.1899999999999995E+00 2.6840000000000000E+03 0.0000000000000000E+00
INPUTS 5
! WÜ K:Source side outlet temperature ->Inlet fluid temperature
! WÜ K:Source side flow rate ->Inlet fluid flow rate
! Pumpensignal (K):SignalK ->Control signal
! [unconnected] Overall pump efficiency
! [unconnected] Motor efficiency
56,1 56,2 SIGNALK CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Pumpe (H)" (Type 110)
*
UNIT 48 TYPE 110 (H)
*$UNIT_NAME Pumpe (H)
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 1580 168
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
8.3900000000000000E+03 4.1899999999999995E+00 2.6840000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! WÜ H:Source side outlet temperature ->Inlet fluid temperature
! WÜ H:Source side flow rate ->Inlet fluid flow rate
! Pumpensignal (H):SignalPK ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
47,1 47,2 SIGNALPK CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Energiemengen" (Type 46)
*
UNIT 58 TYPE 46
*$UNIT_NAME Energiemengen
*$MODEL .\Output\Printegrator\Unformatted\User-Defined and Automatic Monthly Periods\Type46b.tmf
*$POSITION 1280 2249
*$LAYER Main #
*$# PRINTEGRATOR
PARAMETERS 5
! 1 Logical unit
! 2 Logical unit for monthly summaries
! 3 Relative or absolute start time
! 4 Printing & integrating interval
! 5 Number of inputs to avoid integration
4.4000000000000000E+01 4.5000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 8
! WÜ K:Heat transfer rate ->Kuehlen-Übertragende Energie
! WÜ H:Heat transfer rate ->Heizen-Übertragende Energie
! WÜ WWB K:Heat transfer rate ->WWB K-Übertragende Energie
! WÜ WWB SW:Heat transfer rate ->WWB SW-Übertragende Energie
! Kollektor Süd:Useful energy gain ->KollektorSüd
! Kollektor Ost:Useful energy gain ->KollektorOst
! Solarwärmeübertrager:Heat transfer rate ->WÜSolar
! Rohrverluste:Rohrverluste ->Rohrverluste
56,5 47,5 33,5 50,5 61,3
62,3 14,5 ROHRVERLUSTE
*** INITIAL INPUT VALUES
Kühlen Heizen WWBK WWBSW KollektorenSüd
KollektorenOst WÜSolar Rohrverlus te
*** External files
ASSIGN C:\Trnsys17\MyProjects\Masterarbeit\Masterarbeit-überarbeitet\Tageswerte 44
*|? Output file for integrated user-defined period results? |1000
ASSIGN C:\Trnsys17\MyProjects\Masterarbeit\Masterarbeit-überarbeitet\Monatswerte 45
*|? Output file for automatic monthly integrated results? |1000
*------------------------------------------------------------------------------
* Model "Kollektor Süd" (Type 538)
*
UNIT 61 TYPE 538 Süd
*$UNIT_NAME Kollektor Süd
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 101 178
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
8.5500000000000000E+01 1.0000000000000000E+00 3.7900000000000000E+00 7.5069000000000005E+02 1.0000000000000000E+02
1.5000000000000000E+01 7.1999998000000005E+01 4.1899999999999995E+00 2.0000000000000000E+00 6.8800000000000017E-01
2.0987999999999998E+00 1.0800000000000002E-02 4.6000000000000000E+01 9.0000000000000000E+00 9.0000000000000000E+00
0.0000000000000000E+00 6.8400000000000000E+03
INPUTS 13
! Rohr außen aus 1:Outlet temperature ->Inlet temperature
! Rohr außen aus 1:Outlet flow rate ->Array inlet flow rate
! Wetter:Dry bulb temperature ->Ambient temperature
! Wetter:Beam radiation for surface-1 ->Beam radiation on the tilted surface
! Wetter:Sky diffuse radiation for surface-1 ->Sky diffuse radiation on tilt
! Wetter:Ground reflected diffuse radiation for surface-1 ->Ground diffuse radiation on tilt
! Wetter:Slope of surface-1 ->Collector slope
! Wetter:Angle of incidence for surface-1 ->Incidence angle
! Wetter:Azimuth of surface-1 ->Collector azimuth angle
! Wetter:Solar zenith angle ->Solar zenith angle
! Wetter:Solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
64,1 64,2 30,1 30,26 30,28
30,30 30,36 30,34 30,38 30,16
30,17 CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 4.5700000000000003E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 4.5000000000000000E+01 4.5000000000000000E+01 -2.5000000000000000E+01 4.5000000000000000E+01
4.5000000000000000E+01 0.0000000000000000E+00 8.0000000000000000E+01
*** External files
ASSIGN \\Mac\Dropbox\Masterarbeit\Solarthermie\TRNSYS Types\Type 71\new 1 mit 0 Kopie.txt 46
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Kollektor Ost" (Type 538)
*
UNIT 62 TYPE 538 Ost
*$UNIT_NAME Kollektor Ost
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 375 178
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
8.5500000000000000E+01 1.0000000000000000E+00 3.7900000000000000E+00 7.5069000000000005E+02 1.0000000000000000E+02
1.5000000000000000E+01 7.1999998000000005E+01 4.1899999999999995E+00 2.0000000000000000E+00 6.8800000000000017E-01
2.0987999999999998E+00 1.0800000000000002E-02 4.7000000000000000E+01 9.0000000000000000E+00 9.0000000000000000E+00
0.0000000000000000E+00 6.8400000000000000E+03
INPUTS 13
! Rohr außen aus 2:Outlet temperature ->Inlet temperature
! Rohr außen aus 2:Outlet flow rate ->Array inlet flow rate
! Wetter:Dry bulb temperature ->Ambient temperature
! Wetter:Beam radiation for surface-2 ->Beam radiation on the tilted surface
! Wetter:Sky diffuse radiation for surface-2 ->Sky diffuse radiation on tilt
! Wetter:Ground reflected diffuse radiation for surface-2 ->Ground diffuse radiation on tilt
! Wetter:Slope of surface-2 ->Collector slope
! Wetter:Angle of incidence for surface-2 ->Incidence angle
! Wetter:Azimuth of surface-2 ->Collector azimuth angle
! Wetter:Solar zenith angle ->Solar zenith angle
! Wetter:Solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
63,1 63,2 30,1 30,27 30,29
30,31 30,37 30,35 30,39 30,16
30,17 CONST CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 4.5700000000000003E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 4.5000000000000000E+01 4.5000000000000000E+01 4.0000000000000000E+01 4.5000000000000000E+01
4.5000000000000000E+01 0.0000000000000000E+00 8.0000000000000000E+01
*** External files
ASSIGN \\Mac\Dropbox\Masterarbeit\Solarthermie\TRNSYS Types\Type 71\new 1 mit 0 Kopie.txt 47
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Rohr außen aus 2" (Type 31)
*
UNIT 63 TYPE 31 außen aus 2
*$UNIT_NAME Rohr außen aus 2
*$MODEL .\Hydronics\Pipe_Duct\Type31.tmf
*$POSITION 511 425
*$LAYER Main #
PARAMETERS 6
! 1 Inside diameter
! 2 Pipe length
! 3 Loss coefficient
! 4 Fluid density
! 5 Fluid specific heat
! 6 Initial fluid temperature
5.3000000000000012E-02 1.4000000000000000E+02 1.8406798999999996E+01 1.0280000000000000E+03 3.7900000000000000E+00
4.5700000000000003E+00
INPUTS 3
! Teiler:Temperature at outlet 2 ->Inlet temperature
! Teiler:Flow rate at outlet 2 ->Inlet flow rate
! Wetter:Dry bulb temperature ->Environment temperature
6,3 6,4 30,1
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 4.5700000000000003E+00
*------------------------------------------------------------------------------
* Model "Rohr außen aus 1" (Type 31)
*
UNIT 64 TYPE 31 außen aus 1
*$UNIT_NAME Rohr außen aus 1
*$MODEL .\Hydronics\Pipe_Duct\Type31.tmf
*$POSITION 226 424
*$LAYER Main #
PARAMETERS 6
! 1 Inside diameter
! 2 Pipe length
! 3 Loss coefficient
! 4 Fluid density
! 5 Fluid specific heat
! 6 Initial fluid temperature
5.3000000000000012E-02 1.4000000000000000E+02 1.8406798999999996E+01 1.0280000000000000E+03 3.7900000000000000E+00
4.5700000000000003E+00
INPUTS 3
! Teiler:Temperature at outlet 1 ->Inlet temperature
! Teiler:Flow rate at outlet 1 ->Inlet flow rate
! Wetter:Dry bulb temperature ->Environment temperature
6,1 6,2 30,1
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 4.5700000000000003E+00
*------------------------------------------------------------------------------
* Model "Rohr innen aus" (Type 31)
*
UNIT 65 TYPE 31 innen aus
*$UNIT_NAME Rohr innen aus
*$MODEL .\Hydronics\Pipe_Duct\Type31.tmf
*$POSITION 255 660
*$LAYER Main #
PARAMETERS 6
! 1 Inside diameter
! 2 Pipe length
! 3 Loss coefficient
! 4 Fluid density
! 5 Fluid specific heat
! 6 Initial fluid temperature
6.8800000000000014E-02 2.5000000000000000E+01 1.4230799999999999E+01 1.0280000000000000E+03 3.7900000000000000E+00
1.5000000000000000E+01
INPUTS 3
! Solarpumpe:Outlet fluid temperature ->Inlet temperature
! Solarpumpe:Outlet flow rate ->Inlet flow rate
! [unconnected] Environment temperature
38,1 38,2 CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 1.5000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr außen ein 1" (Type 31)
*
UNIT 66 TYPE 31 außen ein 1
*$UNIT_NAME Rohr außen ein 1
*$MODEL .\Hydronics\Pipe_Duct\Type31.tmf
*$POSITION 772 106
*$LAYER Main #
PARAMETERS 6
! 1 Inside diameter
! 2 Pipe length
! 3 Loss coefficient
! 4 Fluid density
! 5 Fluid specific heat
! 6 Initial fluid temperature
5.3000000000000012E-02 1.4000000000000000E+02 1.8406798999999996E+01 1.0280000000000000E+03 3.7900000000000000E+00
4.5700000000000003E+00
INPUTS 3
! Kollektor Süd:Outlet temperature ->Inlet temperature
! Kollektor Süd:Outlet flow rate ->Inlet flow rate
! Wetter:Dry bulb temperature ->Environment temperature
61,1 61,2 30,1
*** INITIAL INPUT VALUES
4.5700000000000003E+00 0.0000000000000000E+00 4.5700000000000003E+00
*------------------------------------------------------------------------------
* Model "Rohr außen ein 2" (Type 31)
*
UNIT 67 TYPE 31 außen ein 2
*$UNIT_NAME Rohr außen ein 2
*$MODEL .\Hydronics\Pipe_Duct\Type31.tmf
*$POSITION 893 267
*$LAYER Main #
PARAMETERS 6
! 1 Inside diameter
! 2 Pipe length
! 3 Loss coefficient
! 4 Fluid density
! 5 Fluid specific heat
! 6 Initial fluid temperature
5.3000000000000012E-02 1.4000000000000000E+02 1.8406798999999996E+01 1.0280000000000000E+03 3.7900000000000000E+00
4.5700000000000003E+00
INPUTS 3
! Kollektor Ost:Outlet temperature ->Inlet temperature
! Kollektor Ost:Outlet flow rate ->Inlet flow rate
! Wetter:Dry bulb temperature ->Environment temperature
62,1 62,2 30,1
*** INITIAL INPUT VALUES
4.5700000000000003E+00 0.0000000000000000E+00 4.5700000000000003E+00
*------------------------------------------------------------------------------
* Model "Rohr innen ein" (Type 31)
*
UNIT 68 TYPE 31 innen ein
*$UNIT_NAME Rohr innen ein
*$MODEL .\Hydronics\Pipe_Duct\Type31.tmf
*$POSITION 897 453
*$LAYER Main #
PARAMETERS 6
! 1 Inside diameter
! 2 Pipe length
! 3 Loss coefficient
! 4 Fluid density
! 5 Fluid specific heat
! 6 Initial fluid temperature
6.8800000000000014E-02 2.5000000000000000E+01 1.4230799999999999E+01 1.0280000000000000E+03 3.7900000000000000E+00
1.5000000000000000E+01
INPUTS 3
! Mixer:Outlet temperature ->Inlet temperature
! Mixer:Outlet flow rate ->Inlet flow rate
! [unconnected] Environment temperature
7,1 7,2 CONST
*** INITIAL INPUT VALUES
4.5700000000000003E+00 0.0000000000000000E+00 1.5000000000000000E+01
*------------------------------------------------------------------------------
* Model "Speicher" (Type 65)
*
UNIT 69 TYPE 65
*$UNIT_NAME Speicher
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 103 2252
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
3.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+02 0.0000000000000000E+00
1.0000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 4.8000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! Schichtenspeicher:temperature at sensor-1 ->T_oben
! Schichtenspeicher:temperature at sensor-3 ->T_mitte
! Schichtenspeicher:temperature at sensor-5 ->T_unten
22,46 22,48 22,50
*** INITIAL INPUT VALUES
T_oben T_mitte T_unten
°C °C °C
LABELS 3
Temperaturen [°C]
Speicher
*** External files
ASSIGN Speicher 48
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Solarwärmeübertrager SK" (Type 65)
*
UNIT 70 TYPE 65 SK
*$UNIT_NAME Solarwärmeübertrager SK
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 382 2252
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+02 0.0000000000000000E+00
4.0000000000000000E+06 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 4.9000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! Ladepumpe:Outlet fluid temperature ->T_stor_out
! Solarwärmeübertrager:Source side outlet temperature ->T_stor_in
! Solarwärmeübertrager:Heat transfer rate ->Q_Solar
39,1 14,1 14,5
*** INITIAL INPUT VALUES
T_stor_out T_stor_in Q_Solar
°C °C °C
LABELS 3
Temperaturen [°C]
WÜ SK
*** External files
ASSIGN WÜ_SK 49
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Kollektoren Süd" (Type 65)
*
UNIT 71 TYPE 65 Süd
*$UNIT_NAME Kollektoren Süd
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 682 2145
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+01 3.4000000000000000E+02 -1.0000000000000000E+01
3.4000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.0000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 2
! Kollektor Süd:Outlet temperature ->T_col_out
! Rohr außen aus 1:Outlet temperature ->T_col_in
61,1 64,1
*** INITIAL INPUT VALUES
T_col_out T_col_in
°C °C
LABELS 3
Temperaturen [°C]
Col S
*** External files
ASSIGN Kollektoren_Sued 50
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Kollektoren Ost" (Type 65)
*
UNIT 72 TYPE 65 Ost
*$UNIT_NAME Kollektoren Ost
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 682 2252
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+01 3.4000000000000000E+02 -1.0000000000000000E+01
3.4000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.1000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 2
! Kollektor Ost:Outlet temperature ->T_col_out
! Rohr außen aus 2:Outlet temperature ->T_col_in
62,1 63,1
*** INITIAL INPUT VALUES
T_col_out T_col_in
°C °C
LABELS 3
Temperaturen [°C]
Col E
*** External files
ASSIGN Kollektoren_Ost 51
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "WWB K-3" (Type 65)
*
UNIT 73 TYPE 65 K-3
*$UNIT_NAME WWB K-3
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 895 2145
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+02 0.0000000000000000E+00
2.0000000000000000E+06 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.2000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! WÜ WWB K:Load side outlet temperature ->T_WWBK_out
! BSU (WWB K):TempWWBK ->T_WWBK_in
! WÜ WWB K:Heat transfer rate ->Q_WWBK
33,3 TEMPWWBK 33,5
*** INITIAL INPUT VALUES
T_WWBK_out T_WWBK_in Q_WWBK
°C °C °C
LABELS 3
Temperaturen [°C]
Wärmeleistung [kJ/h]
WWB K
*** External files
ASSIGN WWB_K 52
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "WWB SW-3" (Type 65)
*
UNIT 74 TYPE 65 SW-3
*$UNIT_NAME WWB SW-3
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 895 2252
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+02 0.0000000000000000E+00
2.0000000000000000E+06 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.3000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! WÜ WWB SW:Load side outlet temperature ->T_WWBSW_out
! BSU (WWB SW):TempWWBSW ->T_WWBSW_in
! WÜ WWB SW:Heat transfer rate ->Q_WWBSW
50,3 TEMPWWBSW 50,5
*** INITIAL INPUT VALUES
T_WWBSW_out T_WWBSW_in Q_WWBSW
°C °C °C
LABELS 3
Temperaturen [°C]
Wärmeleistung [kJ/h]
WWB SW
*** External files
ASSIGN WWB_SW 53
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Heizen" (Type 65)
*
UNIT 75 TYPE 65
*$UNIT_NAME Heizen
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 1084 2145
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 2.5000000000000000E+01 0.0000000000000000E+00
2.0000000000000000E+06 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.4000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! WÜ H:Load side outlet temperature ->T_H_out
! Temperaturen:HeizenEin1 ->T_H_in
! WÜ H:Heat transfer rate ->Q_H
47,3 44,2 47,5
*** INITIAL INPUT VALUES
T_H_out T_H_in Q_H
°C °C °C
LABELS 3
Temperaturen [°C]
Wärmeleistung [kJ/h]
Heizen
*** External files
ASSIGN Heizen 54
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Kühlen" (Type 65)
*
UNIT 76 TYPE 65
*$UNIT_NAME Kühlen
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 1084 2252
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 3.0000000000000000E+01 0.0000000000000000E+00
2.0000000000000000E+06 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.5000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! WÜ K:Load side outlet temperature ->T_K_out
! Temperaturen:KuehlenEin1 ->T_K_in
! WÜ K:Heat transfer rate ->Q_K
56,3 44,8 56,5
*** INITIAL INPUT VALUES
T_K_out T_K_in Q_K
°C °C °C
LABELS 3
Temperaturen [°C]
Wärmeleistung [kJ/h]
Kühlen
*** External files
ASSIGN Kuehlen 55
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Solarwärmeübertrager PK" (Type 65)
*
UNIT 77 TYPE 65 PK
*$UNIT_NAME Solarwärmeübertrager PK
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 382 2145
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+01 1.1500000000000000E+02 -1.0000000000000000E+01
1.1500000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.6000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 2
! Rohr innen ein:Outlet temperature ->T_col_out
! Solarwärmeübertrager:Source side outlet temperature ->T_col_in
68,1 14,1
*** INITIAL INPUT VALUES
T_col_out T_col_in
°C °C
LABELS 3
Temperaturen [°C]
WÜ PK
*** External files
ASSIGN WÜ_PK 56
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Außentemperatur" (Type 65)
*
UNIT 78 TYPE 65
*$UNIT_NAME Außentemperatur
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 102 2145
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
1.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+01 4.0000000000000000E+01 -1.0000000000000000E+01
4.0000000000000000E+01 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 5.7000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 1
! Temperaturen:Außentemperatur ->Außentemperatur
44,1
*** INITIAL INPUT VALUES
T_außen
°C
LABELS 3
Temperaturen [°C]
T_außen
*** External files
ASSIGN Aussentemperatur 57
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* EQUATIONS "Rohrverluste"
*
EQUATIONS 1
Rohrverluste = [65,3]+[68,3]+[64,3]+[63,3]+[66,3]+[67,3]
*$UNIT_NAME Rohrverluste
*$LAYER Main
*$POSITION 100 2015
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 8.7600000000000000E+03
TIMESTEP = 1 / 1
DIFFERENTIAL EQUATION ERROR TOLERANCE = 4.0000000000000010E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 4.0000000000000010E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 90 : TRNDll.dll is compiled in release mode. External DLLs will be loaded from the .\UserLib\ReleaseDLLs\ directory.
Reported information : Not available
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type11, Type5, Type2, Type15, Type114, Type110, Type9, Type46, Type31, Type65
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "FileReader.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "TESSSolarLibrary_v17.01_Release.dll": Type538
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type127.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "type340.dll": Type340
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type56.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type76Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type79-W.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type79Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type805.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type82Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 2 user DLLs were loaded after searching in "C:\Trnsys17\UserLib\ReleaseDLLs"
*** Warning at time : 0.000000
Generated by Unit : 61
Generated by Type : 538
Message : The getIsConvergenceReached() function was called. This function has been renamed "getIsEndOfTimeStep()." Please revise the calling Type
*** Warning at time : 0.000000
Generated by Unit : 61
Generated by Type : 538
Message : The getIsFirstTimestep() function was called. This function has been renamed "getIsStartTime()." Please revise the calling Type
*** Warning at time : 1.000000
Generated by Unit : 66
Generated by Type : 31
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 61 Type 538 Output 2 (variable type TE1) is connected to Unit 66 Type 31 input 2 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
61 538 2 TE1 -----------> 66 31 2 MF1
*** Warning at time : 1.000000
Generated by Unit : 67
Generated by Type : 31
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 62 Type 538 Output 2 (variable type TE1) is connected to Unit 67 Type 31 input 2 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
62 538 2 TE1 -----------> 67 31 2 MF1
*** The TRNSYS components will be called in the following order:
Unit # 44 Type # 9
Unit # 45 Type # 9
Unit # 30 Type # 15
Unit # 6 Type # 11
Unit # 7 Type # 11
Unit # 14 Type # 5
Unit # 22 Type # 340
Unit # 43 Type # 2
Unit # 47 Type # 5
Unit # 26 Type # 2
Unit # 27 Type # 2
Unit # 32 Type # 2
Unit # 33 Type # 5
Unit # 35 Type # 2
Unit # 37 Type # 114
Unit # 38 Type # 110
Unit # 39 Type # 110
Unit # 50 Type # 5
Unit # 51 Type # 2
Unit # 52 Type # 114
Unit # 55 Type # 2
Unit # 56 Type # 5
Unit # 57 Type # 114
Unit # 48 Type # 110
Unit # 61 Type # 538
Unit # 62 Type # 538
Unit # 63 Type # 31
Unit # 64 Type # 31
Unit # 65 Type # 31
Unit # 66 Type # 31
Unit # 67 Type # 31
Unit # 68 Type # 31
Unit # 58 Type # 46
Unit # 69 Type # 65
Unit # 70 Type # 65
Unit # 71 Type # 65
Unit # 72 Type # 65
Unit # 73 Type # 65
Unit # 74 Type # 65
Unit # 75 Type # 65
Unit # 76 Type # 65
Unit # 77 Type # 65
Unit # 78 Type # 65
*** Warning at time : 348.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.19698675248694 %
*** Warning at time : 348.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.19698675248694 %
*** Warning at time : 370.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 371.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -20.5582855778273 %
*** Warning at time : 371.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -20.5582855778273 %
*** Warning at time : 539.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 39 63 64 68
*** Warning at time : 589.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 634.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 635.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -13.7963641344932 %
*** Warning at time : 635.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -13.7963641344932 %
*** Warning at time : 661.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -6.02943485044056 %
*** Warning at time : 661.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -6.02943485044056 %
*** Warning at time : 971.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -7.18407983520921 %
*** Warning at time : 971.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -7.18407983520921 %
*** Warning at time : 1089.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 38 63 64 65
*** Warning at time : 1113.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 39 61 62 66 67 68
*** Warning at time : 1137.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 38 39 65
*** Warning at time : 1257.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 68
*** Warning at time : 1332.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 57 48 61 62 63 64 65 66 67 68
*** Warning at time : 1499.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 61 62 68
*** Warning at time : 1522.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 38 39 61 62 65 66 67
*** Warning at time : 1524.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -39.9748661994282 %
*** Warning at time : 1524.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 23.7974274128886 %
*** Warning at time : 1524.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 64.0662283517682 %
*** Warning at time : 1524.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 35.4815093391606 %
*** Warning at time : 1524.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 58.5268908150465 %
*** Warning at time : 1524.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 88.4099561239932 %
*** Warning at time : 1528.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 13.5898369766965 %
*** Warning at time : 1547.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 26 32 38 61 62 63 64 65 68
*** Warning at time : 1570.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -10.0740653531299 %
*** Warning at time : 1570.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -41.2660889453230 %
*** Warning at time : 1571.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -13.9927824159444 %
*** Warning at time : 1646.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -7.46358674690707 %
*** Warning at time : 1646.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 38 39 65
*** Warning at time : 1650.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.11068992252503 %
*** Warning at time : 1689.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 1691.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.70930988598207 %
*** Warning at time : 1691.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.70930653771134 %
*** Warning at time : 1691.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 29.1611192200577 %
*** Warning at time : 1691.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 47.1291638322509 %
*** Warning at time : 1691.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 63.4741847545868 %
*** Warning at time : 1691.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 39 61 62 66 67 68
*** Warning at time : 1740.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 39 68
*** Warning at time : 1742.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 58.2013803316986 %
*** Warning at time : 1742.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 39 61 62 63 64 66 67 68
*** Warning at time : 1761.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 38 39 65
*** Warning at time : 1763.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -19.0517534586324 %
*** Warning at time : 1763.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 18.4786281491986 %
*** Warning at time : 1763.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 27.4420263359428 %
*** Warning at time : 1763.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 73.6362886622586 %
*** Warning at time : 1763.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 83.5278597746123 %
*** Warning at time : 1764.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -23.0781510908986 %
*** Warning at time : 1769.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.17868115608079 %
*** Warning at time : 1769.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.07275894867927 %
*** Warning at time : 1769.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.05871248577050 %
*** Warning at time : 1769.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.04892016920841 %
*** Warning at time : 1791.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -23.8877770614954 %
*** Warning at time : 1791.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.95193959995905 %
*** Warning at time : 1791.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -14.4743716260582 %
*** Warning at time : 1791.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -19.5212804720245 %
*** Warning at time : 1791.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.88907100554142 %
*** Warning at time : 1791.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 38.5610260373315 %
*** Warning at time : 1792.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.33624289969350 %
*** Warning at time : 1814.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -37.6604130695744 %
*** Warning at time : 1814.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 39 61 62
*** Warning at time : 1834.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14
*** Warning at time : 1835.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 45.0745849067376 %
*** Warning at time : 1859.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 19.3053457168362 %
*** Warning at time : 1859.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 19.3053499487119 %
*** Warning at time : 1859.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 53.9043093472416 %
*** Warning at time : 1859.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 61 62 67 68
*** Warning at time : 1881.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 61 62 65 67
*** Warning at time : 1882.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -67.2544638685800 %
*** Warning at time : 1882.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 78.7336377926886 %
*** Warning at time : 1882.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 107.406112603799 %
*** Warning at time : 1882.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 101.443738388557 %
*** Warning at time : 1930.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 41.5048126411695 %
*** Warning at time : 1930.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 38 39 65 68
*** Warning at time : 1955.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 50.2964400625485 %
*** Warning at time : 1955.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.76387168166342 %
*** Warning at time : 1977.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14
*** Warning at time : 1979.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -15.4501590188443 %
*** Warning at time : 1979.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 41.2470487337369 %
*** Warning at time : 1979.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -13.4240607049045 %
*** Warning at time : 1979.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -27.0663741774552 %
*** Warning at time : 1979.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 13.7528224628285 %
*** Warning at time : 1979.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 63 64 65
*** Warning at time : 2001.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 63 64
*** Warning at time : 2002.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -25.0889359961368 %
*** Warning at time : 2002.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 70.4727744487829 %
*** Warning at time : 2030.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -25.7626760197565 %
*** Warning at time : 2030.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -18.6775829608286 %
*** Warning at time : 2030.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.4736699440563 %
*** Warning at time : 2030.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 24.5607215256872 %
*** Warning at time : 2031.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.9683925814086 %
*** Warning at time : 2032.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -9.64195321520525 %
*** Warning at time : 2032.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.94775101330758 %
*** Warning at time : 2049.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -70.6141193393068 %
*** Warning at time : 2050.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -50.5115210245430 %
*** Warning at time : 2050.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -47.5976827241609 %
*** Warning at time : 2125.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 33.6323269019781 %
*** Warning at time : 2125.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 2145.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -28.0640967731822 %
*** Warning at time : 2145.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -48.7693848135750 %
*** Warning at time : 2169.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -43.6367622949336 %
*** Warning at time : 2169.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 6.07221996897644 %
*** Warning at time : 2169.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 48.5457523628377 %
*** Warning at time : 2169.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 49.7257515515420 %
*** Warning at time : 2194.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -19.9526911952008 %
*** Warning at time : 2217.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -22.8545170517042 %
*** Warning at time : 2217.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 23.1351254502917 %
*** Warning at time : 2241.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 13.1406799224105 %
*** Warning at time : 2241.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.09423903800553 %
*** Warning at time : 2274.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 2289.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 61 62 65
*** Warning at time : 2291.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 36.5632515794471 %
*** Warning at time : 2291.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -6.04928128614449 %
*** Warning at time : 2291.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 2312.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14
*** Warning at time : 2314.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 68
*** Warning at time : 2337.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -36.8855026383036 %
*** Warning at time : 2337.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -63.2203690949344 %
*** Warning at time : 2338.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 55.0515036235012 %
*** Warning at time : 2338.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 30.1010435368711 %
*** Warning at time : 2365.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -16.6815956113722 %
*** Warning at time : 2365.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -8.74543932561921 %
*** Warning at time : 2365.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 13.6705714899884 %
*** Warning at time : 2365.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 20.7360986505274 %
*** Warning at time : 2369.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 11.2462290335155 %
*** Warning at time : 2385.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -23.3365790272245 %
*** Warning at time : 2385.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 69.0184000284440 %
*** Warning at time : 2410.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.25657956969341 %
*** Warning at time : 2410.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -21.7244663577818 %
*** Warning at time : 2434.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 50.0144737281950 %
*** Warning at time : 2434.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 50.0144747280706 %
*** Warning at time : 2434.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 38 65 68
*** Warning at time : 2456.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14
*** Warning at time : 2458.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 39.5019511655544 %
*** Warning at time : 2458.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 39.5019518284622 %
*** Warning at time : 2458.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 2480.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 39
*** Warning at time : 2482.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 56.0115657256186 %
*** Warning at time : 2482.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 56.0115657122424 %
*** Warning at time : 2482.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 38 39 65
*** Warning at time : 2531.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -21.2613969182168 %
*** Warning at time : 2531.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -13.5659832067313 %
*** Warning at time : 2531.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.86106463304412 %
*** Warning at time : 2531.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 38.4201954087533 %
*** Warning at time : 2531.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 45.1258782940892 %
*** Warning at time : 2532.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -9.92115842390405 %
*** Warning at time : 2576.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 2577.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -34.9042297562920 %
*** Warning at time : 2577.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 16.0905114055831 %
*** Warning at time : 2577.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 18.2584050009948 %
*** Warning at time : 2577.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 38.2827014938871 %
*** Warning at time : 2602.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -18.0308640790278 %
*** Warning at time : 2624.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14
*** Warning at time : 2650.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.47630115420182 %
*** Warning at time : 2650.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -16.0602580395193 %
*** Warning at time : 2675.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.8155349926631 %
*** Warning at time : 2675.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 19.1599826998356 %
*** Warning at time : 2675.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -10.8363237688368 %
*** Warning at time : 2675.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -17.4930305766997 %
*** Warning at time : 2675.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 39
*** Warning at time : 2679.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 16.0029557909590 %
*** Warning at time : 2679.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 7.51822064248516 %
*** Warning at time : 2681.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.81850145023526 %
*** Warning at time : 2698.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -15.7259539805480 %
*** Warning at time : 2698.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -42.0018944701968 %
*** Warning at time : 2698.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 45.4530702959681 %
*** Warning at time : 2698.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 56.0348665477057 %
*** Warning at time : 2698.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 36.9305361582669 %
*** Warning at time : 2698.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 38 39 65 68
*** Warning at time : 2721.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 2723.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.5097408923579 %
*** Warning at time : 2723.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 21.1099944136545 %
*** Warning at time : 2723.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 47.7040498617447 %
*** Warning at time : 2723.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 17.4250667898379 %
*** Warning at time : 2723.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 47.8195668432553 %
*** Warning at time : 2723.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 38 63 64 65
*** Warning at time : 2743.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 26 32 38 61 62 63 64 65 66 67 68
*** Warning at time : 2818.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 30.7366097789852 %
*** Warning at time : 2840.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 2866.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.89015715276366 %
*** Warning at time : 2866.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -10.2858139930297 %
*** Warning at time : 2866.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 18.6609806246473 %
*** Warning at time : 2866.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 68
*** Warning at time : 2890.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -44.5027696942119 %
*** Warning at time : 2890.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 14.2112796637066 %
*** Warning at time : 2890.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 53.7143642865209 %
*** Warning at time : 2890.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 23.4668368706671 %
*** Warning at time : 2890.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 45.3821667998119 %
*** Warning at time : 2890.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 38 63 64 65
*** Warning at time : 2912.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 2936.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 38 39 61 62 65 66 67
*** Warning at time : 2938.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -15.3081602692924 %
*** Warning at time : 2938.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -15.3081578639039 %
*** Warning at time : 2938.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 28.0631742669189 %
*** Warning at time : 2938.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 64.5913612942580 %
*** Warning at time : 2938.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 24.7278269266587 %
*** Warning at time : 2938.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 64.2822055979404 %
*** Warning at time : 2938.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 38 39 65
*** Warning at time : 2940.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 24.9364594696958 %
*** Warning at time : 2959.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 39 63 64 68
*** Warning at time : 2983.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 61 62 65 67
*** Warning at time : 3033.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 11.1075332433346 %
*** Warning at time : 3033.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 11.1075331071169 %
*** Warning at time : 3033.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 44.6048323445899 %
*** Warning at time : 3033.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 61 62 68
*** Warning at time : 3057.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 37.4474713186916 %
*** Warning at time : 3057.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 48.7645514329283 %
*** Warning at time : 3057.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 38 63 64 65
*** Warning at time : 3081.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -20.0007001987526 %
*** Warning at time : 3105.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 38 39 65
*** Warning at time : 3127.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 27 39
*** Warning at time : 3128.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -16.8938468605956 %
*** Warning at time : 3129.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 37.0477414550547 %
*** Warning at time : 3154.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 9.97394765731674 %
*** Warning at time : 3154.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 38.2372914726081 %
*** Warning at time : 3154.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 39
*** Warning at time : 3160.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 15.2528081529827 %
*** Warning at time : 3160.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 12.9244036841778 %
*** Warning at time : 3178.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 61 62 68
*** Warning at time : 3180.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.4529786049698 %
*** Warning at time : 3180.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -31.7032924054716 %
*** Warning at time : 3180.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 63 64 65
*** Warning at time : 3184.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 20.4591159255613 %
*** Warning at time : 3184.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 27.0017474352096 %
*** Warning at time : 3200.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 38 61 62 65 68
*** Warning at time : 3249.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.59884556398250 %
*** Warning at time : 3249.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.59884583191771 %
*** Warning at time : 3249.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 27.9074729727968 %
*** Warning at time : 3249.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 47.1239745434671 %
*** Warning at time : 3249.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 62.6065644767022 %
*** Warning at time : 3249.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 39 61 62 66 67 68
*** Warning at time : 3298.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -19.7574433262224 %
*** Warning at time : 3298.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.64851103795182 %
*** Warning at time : 3298.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 21.7763269965824 %
*** Warning at time : 3298.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 21.9082131622954 %
*** Warning at time : 3298.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 68
*** Warning at time : 3302.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 28.7110360254746 %
*** Warning at time : 3302.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 16.9894746466464 %
*** Warning at time : 3304.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.65271208478654 %
*** Warning at time : 3304.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -8.75448868842956 %
*** Warning at time : 3306.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.28021695599695 %
*** Warning at time : 3306.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.22367576319924 %
*** Warning at time : 3306.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 13.4656154142700 %
*** Warning at time : 3322.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 38 39 65
*** Warning at time : 3324.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 29.0758340939926 %
*** Warning at time : 3324.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 68
*** Warning at time : 3326.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -7.41183310063749 %
*** Warning at time : 3328.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 16.3148333198266 %
*** Warning at time : 3343.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 38 61 62 65 66 67 68
*** Warning at time : 3367.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 38 61 62 65 66 67 68
*** Warning at time : 3369.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -16.1962742029832 %
*** Warning at time : 3397.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 39
*** Warning at time : 3401.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 14.7795366060205 %
*** Warning at time : 3416.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 38 61 62 65 66 67 68
*** Warning at time : 3418.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -27.4025373373306 %
*** Warning at time : 3418.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 41.9240058577332 %
*** Warning at time : 3418.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -16.7030385328202 %
*** Warning at time : 3418.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -30.8105703077658 %
*** Warning at time : 3418.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 10.5210999285451 %
*** Warning at time : 3418.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 39
*** Warning at time : 3420.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 7.32038468550407 %
*** Warning at time : 3439.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 61 62 66 67
*** Warning at time : 3441.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -32.7842183247833 %
*** Warning at time : 3441.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 33.7931155511595 %
*** Warning at time : 3441.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 68.1597570253871 %
*** Warning at time : 3441.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 39.1047331639696 %
*** Warning at time : 3441.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 65.2462793856053 %
*** Warning at time : 3441.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 63 64 65
*** Warning at time : 3463.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 38 61 62 65 66 67 68
*** Warning at time : 3465.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -36.7018387414652 %
*** Warning at time : 3487.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 26 32 38 61 62 65 66 67 68
*** Warning at time : 3489.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -32.3687395377211 %
*** Warning at time : 3512.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 61 62 65 67
*** Warning at time : 3514.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -29.1557051740606 %
*** Warning at time : 3514.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -14.4115457321681 %
*** Warning at time : 3514.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 9.97549497131046 %
*** Warning at time : 3514.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 23.9174292267923 %
*** Warning at time : 3514.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 31.6922116129111 %
*** Warning at time : 3516.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.7467758412704 %
*** Warning at time : 3516.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -22.0628003142200 %
*** Warning at time : 3516.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -12.5403888577967 %
*** Warning at time : 3516.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 15.8315690053762 %
*** Warning at time : 3516.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 24.4964958774871 %
*** Warning at time : 3536.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 3538.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -75.1738442355120 %
*** Warning at time : 3538.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -50.2844309396137 %
*** Warning at time : 3538.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -30.6022324315767 %
*** Warning at time : 3538.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 5.63326184992866 %
*** Warning at time : 3538.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 15.6576297846081 %
*** Warning at time : 3540.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 25.0424001085498 %
*** Warning at time : 3540.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -28.3257969635413 %
*** Warning at time : 3540.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 38 39 65 68
*** Warning at time : 3542.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -19.3755598596525 %
*** Warning at time : 3544.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -9.17242783857790 %
*** Warning at time : 3560.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 3562.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 26 32 61 62 68
*** Warning at time : 3564.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -18.6931357386930 %
*** Warning at time : 3564.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -18.6931357479902 %
*** Warning at time : 3564.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 18.0641858655957 %
*** Warning at time : 3564.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 75.3932592120880 %
*** Warning at time : 3564.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 33.9490020120039 %
*** Warning at time : 3564.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 70.8094433143216 %
*** Warning at time : 3564.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 38 39 65
*** Warning at time : 3566.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 33.6988189692061 %
*** Warning at time : 3566.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 22.8108335551534 %
*** Warning at time : 3566.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 22.8108335584392 %
*** Warning at time : 3566.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 22 26 27 39
*** Warning at time : 3568.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 15.1998173767059 %
*** Warning at time : 3568.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 27.8608349192118 %
*** Warning at time : 3569.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.98141322200826 %
*** Warning at time : 3584.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 3586.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 63 64 65
*** Warning at time : 3588.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 28.9658416795452 %
*** Warning at time : 3588.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 28.9658416629617 %
*** Warning at time : 3588.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 62.8396057146137 %
*** Warning at time : 3588.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 39 61 62 63 64 66 67 68
*** Warning at time : 3590.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 58.0112379011072 %
*** Warning at time : 3608.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 3610.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -80.1988490976516 %
*** Warning at time : 3610.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -46.8774619544412 %
*** Warning at time : 3610.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 38.4749254746296 %
*** Warning at time : 3610.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 54.3220585166262 %
*** Warning at time : 3690.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 45.7018834997038 %
*** Warning at time : 3690.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 37.4276968948653 %
*** Warning at time : 3690.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 57 48 61 62 63 64 65 66 67 68
*** Warning at time : 3776.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.25913976114703 %
*** Warning at time : 3776.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -5.25913976114703 %
*** Warning at time : 3810.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 43 47 26 27 38 39 55 56 48 63 64 65
*** Warning at time : 3812.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 3873.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 61 62 65
*** Warning at time : 3930.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 3931.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 22 43 47 26 55 56 57 48
*** Warning at time : 3947.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 3954.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 3978.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 4026.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 4074.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 4075.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 4098.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 45.3147253627991 %
*** Warning at time : 4098.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 55.8782459813090 %
*** Warning at time : 4098.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 57.8052315809774 %
*** Warning at time : 4098.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 66.1780275753586 %
*** Warning at time : 4098.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 349.166068762466 %
*** Warning at time : 4098.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 39 55 56 48 61 62 63 64 66 67 68
*** Warning at time : 4122.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 206.959705883952 %
*** Warning at time : 4122.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 4146.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 4170.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 4194.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 4290.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 54.6143656048121 %
*** Warning at time : 4290.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 63.9479332546809 %
*** Warning at time : 4290.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 51.0064427242174 %
*** Warning at time : 4290.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 44.8917850359534 %
*** Warning at time : 4290.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 4458.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 4482.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 26 32 38 61 62 63 64 65 66 67 68
*** Warning at time : 4506.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 26 27 32 39 68
*** Warning at time : 4626.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 4650.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 26 32 38 61 62 63 64 65 66 67 68
*** Warning at time : 4746.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 324.668513007011 %
*** Warning at time : 4746.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 39.0979612571771 %
*** Warning at time : 4746.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 36.1270569926932 %
*** Warning at time : 4746.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 46.2597805980067 %
*** Warning at time : 4746.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 57 48 61 62 63 64 65 66 67 68
*** Warning at time : 4794.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 4914.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 4938.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 26 32 38 61 62 63 64 65 66 67 68
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 68.6702004801877 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 181.703299767334 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 76.5798255004750 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 76.5127516017125 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 72.3210389714627 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 598.442360906975 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 358.838489855804 %
*** Warning at time : 4962.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 75.2827844531935 %
*** Warning at time : 4962.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 57 48 61 62 63 64 65 66 67 68
*** Warning at time : 5010.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 231.711309993709 %
*** Warning at time : 5034.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 5154.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 118.858769384123 %
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 116.131333474710 %
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 113.788460672776 %
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 118.631568248925 %
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 111.870919528355 %
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 119.958345423689 %
*** Warning at time : 5202.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 115.370363281611 %
*** Warning at time : 5202.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 63 64 65 68
*** Warning at time : 5298.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 26 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 5370.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 5417.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 25.7151993756486 %
*** Warning at time : 5417.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 14.3300913516878 %
*** Warning at time : 5490.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 5634.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 5754.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 5770.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 5778.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 5826.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 39 61 62 63 64 65 66 67 68
*** Warning at time : 6018.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 48 61 62 63 64 65 66 67 68
*** Warning at time : 6106.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 61 62 63 64 65 66 67 68
*** Warning at time : 6152.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 26.6024433954199 %
*** Warning at time : 6513.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -7.14187977778831 %
*** Warning at time : 6713.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 7 14 22 43 47 26 27 32 38 39 55 56 57 61 62 65 66 67 68
*** Warning at time : 6924.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is 8.21198921569184 %
*** Warning at time : 7024.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 47 26 27 32 38 39 55 56 57 48 61 62 63 64 65 66 67 68
*** Warning at time : 7499.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 14 22 27 38 39 61 62 63 64 65 66 67
*** Warning at time : 7621.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 43 26 27 32 39 61 62 63 64 66 67 68
*** Warning at time : 7715.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Warning at time : 7859.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 6 7 14 22 26 27 32 38 61 62 63 64 65 66 67 68
*** Warning at time : 8125.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -8.66591467687274 %
*** Warning at time : 8125.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -8.66591467687274 %
*** Warning at time : 8148.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -6.26509093592224 %
*** Warning at time : 8148.000000
Generated by Unit : 22
Generated by Type : 340
Message : Difference in Power balance is -6.26509093592224 %
*** Warning at time : 8651.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 441 : The inputs to the listed units have not converged at this timestep. The values at the last iteration will be used and the simulation will proceed.
Reported information : UNITS: 14 38 65
*** Notice at time : 8760.000000
Generated by Unit : 22
Generated by Type : 340
Message : Qerrsum of V1.99E: 3239920.47511751 [kJ]
*** Warning at time : 8760.000000
Generated by Unit : 26
Generated by Type : 2
Message : The controller was stuck during 17 percent of the simulation timesteps.
*** Warning at time : 8760.000000
Generated by Unit : 63
Generated by Type : 31
Message : The pipe model has reported that the flow rate through the pipe during at least one of the timesteps was greater than the capacity of the pipe. Users should be aware that at least one component in a closed piping loop should contain enough capacitance to hold at least one timesteps worth of fluid or a run-away solution may be encountered.
*** Warning at time : 8760.000000
Generated by Unit : 64
Generated by Type : 31
Message : The pipe model has reported that the flow rate through the pipe during at least one of the timesteps was greater than the capacity of the pipe. Users should be aware that at least one component in a closed piping loop should contain enough capacitance to hold at least one timesteps worth of fluid or a run-away solution may be encountered.
*** Warning at time : 8760.000000
Generated by Unit : 65
Generated by Type : 31
Message : The pipe model has reported that the flow rate through the pipe during at least one of the timesteps was greater than the capacity of the pipe. Users should be aware that at least one component in a closed piping loop should contain enough capacitance to hold at least one timesteps worth of fluid or a run-away solution may be encountered.
*** Warning at time : 8760.000000
Generated by Unit : 66
Generated by Type : 31
Message : The pipe model has reported that the flow rate through the pipe during at least one of the timesteps was greater than the capacity of the pipe. Users should be aware that at least one component in a closed piping loop should contain enough capacitance to hold at least one timesteps worth of fluid or a run-away solution may be encountered.
*** Warning at time : 8760.000000
Generated by Unit : 67
Generated by Type : 31
Message : The pipe model has reported that the flow rate through the pipe during at least one of the timesteps was greater than the capacity of the pipe. Users should be aware that at least one component in a closed piping loop should contain enough capacitance to hold at least one timesteps worth of fluid or a run-away solution may be encountered.
*** Warning at time : 8760.000000
Generated by Unit : 68
Generated by Type : 31
Message : The pipe model has reported that the flow rate through the pipe during at least one of the timesteps was greater than the capacity of the pipe. Users should be aware that at least one component in a closed piping loop should contain enough capacitance to hold at least one timesteps worth of fluid or a run-away solution may be encountered.
*** Warning at time : 8760.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The simulation failed to converge during 132 timesteps (1% of the time).
*** Warning at time : 8760.000000
Generated by Unit : 61
Generated by Type : 538
Message : The file \\Mac\Dropbox\Masterarbeit\Solarthermie\TRNSYS Types\Type 71\new 1 mit 0 Kopie.txt was called 197 times (2% of the time) with a first independent variable value above the range supplied in the data file. Data is interpolated within the data file range but is not extrapolated beyond the range. Performance of the equipment modeled by this UNIT may be incorrect.
*** Warning at time : 8760.000000
Generated by Unit : 62
Generated by Type : 538
Message : The file \\Mac\Dropbox\Masterarbeit\Solarthermie\TRNSYS Types\Type 71\new 1 mit 0 Kopie.txt was called 200 times (2% of the time) with a first independent variable value above the range supplied in the data file. Data is interpolated within the data file range but is not extrapolated beyond the range. Performance of the equipment modeled by this UNIT may be incorrect.
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File:
6 2 4
7 5 6
14 9 9
22 11 41
26 15 42
27 31 43
30 46 44
32 65 45
33 110 46
35 114 47
37 340 48
38 538 49
39 50
43 51
44 52
45 53
47 54
48 55
50 56
51 57
52
55
56
57
58
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
*********************************************************************************************************
Total TRNSYS Calculation Time: 6414.1699 Seconds
-------------- next part --------------
> Am 28.02.2018 um 20:35 schrieb Jeff Thornton via TRNSYS-users <trnsys-users at lists.onebuilding.org>:
>
> Maverick,
>
> Your 3rd control shuts off the pump when the collector temperature exceeds 110 C. But once the pump shuts off, the collector will stagnate and reach very high temperatures with no flow through the collectors. In this case, the 3rd control should probably sense the outlet temperature of the pipe leaving the collector and not the collector itself. This way you're getting the overheat protection when there is flow.
>
> As for the quick temperature rise in winter, I'll point out that Type 71 does not include the impact of mass. So temperatures will rise and fall very quickly. The TESS version of the evacuated tube model accounts for the mass and should behave much as you expect it to.
>
> Jeff
>
> ---
> Jeff Thornton
> President - TESS LLC
> 22 N. Carroll Street, Madison WI USA 53703
> Office: (608) 274-2577 Fax: (608) 278-1475
> www.tess-inc.com
> E-Mail: thornton at tess-inc.com
>
>
> On 02/26/2018 4:49 am, maverickxxx1991 via TRNSYS-users wrote:
>> Hi,
>> I?m using 2 type 71 and I get temperature up to 400?C if I use a
>> control. I have 3 Controllers of type 2b:
>> 1st looks if temperature of collector is higher than secondary inlet
>> of heat exchanger with hysteresis (7K and 4K)
>> 2nd looks for storage temperature (<95?C with hysteresis again ?On? at 90?C)
>> 3rd is for collector protection (collector temperature <110?C with
>> hysteresis again ?On? at 95?C)
>> The collector values are (0.688, 0.583, 0.003) (last in W/(m^2*K) and
>> W/(m^2*K^2)).
>> Test condition flow rate 0.02 kg/(s*m^2).
>> 2x86 m^2 area, no. in series 1, flow rate 2600 kg/hr.
>> So if the controls says out the temperature in the collectors rise up
>> to 400?C. Is it normal? How can I fix it? I even wondering about the
>> temperatures rising so fast also in winter from 15 to 80?C.
>> Thanks for help!
>> maverickxxx
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org