[TRNSYS-users] R: Help: Weather Data Not supporting

Giulia Mezzasalma giulia.mezzasalma at red-srl.com
Fri Feb 2 11:02:40 PST 2018


Dear Bishan Thapa

Pay attention on the data Type you’re using. Every weather type needs special weather file.
I found Kathmandu weather file inside Meteonorm weather data so you have to use type 15.6 to run this.
There are also Energy file weather data in the site (https://energyplus.net/weather-region/asia_wmo_region_2/NPL%20%20 ), discharge the epw file and use it in your simulation studio file inside type 15-3.

Best regards

Giulia

Da: Bishan Thapa [mailto:bthapa1 at uncc.edu]
Inviato: venerdì 2 febbraio 2018 19:27
A: trnsys-users at lists.onebuilding.org
Oggetto: [TRNSYS-users] Help: Weather Data Not supporting

Hello Everyone,

I am trying to simulate a simple SDHW system for the Nepalease house and need to insert the weather data of Kathmandu. When I do so and run the simulation, I cannot get the output and there is an error message. But when I put the cities of US, it gives me some plot.

Please help me identifying the error in this. I have attached the TRNSYS file herewith the email. Please feel free to run the file in the program.

Also I have attached the error message found during the running of the simulation.

Thanks,
Bishan Thapa

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180202/43fb3212/attachment.htm>


More information about the TRNSYS-users mailing list