[TRNSYS-users] Job Opportunity for TRNSYS modelling/simulation

Mon Feb 19 06:51:05 PST 2018

Dear all,

I hope all is well.

there is a job opportunity (Full Time) in London, UK. Please see below.

Please let me know if you had any queries for that.

Thanks

Br.

Yang

*BEN Description*:

The Balanced Energy Networks (BEN) project at LSBU brings together
cross-sector supply chains to deliver integrated energy solutions at
different scales to fulfil the energy systems challenges of achieving a
low-carbon economy.
http://www.lsbu.ac.uk/research/centres-groups/sites/ben-project

*Activities and objectives*:

The post-holder will be responsible for exploring how to transfer and
distribute energy within BEN system in an intelligent way from heat pump or
energy storage tank to buildings; and from one building to another building
etc. BEN constraints will be investigated combining with existing BEN and
TRNSYS models through programming language Fortran, C++ etc.

The software packages TRNSYS, Matlab/Simulink are to be applied to the
development of BEN whole system control, operation and optimization.

*Essential knowledge and requirements*:

Applicants should be keen on programming with TRNSYS (Borehole, Heat Pump,
Storage Tank, Building Services), Fortran and Matlab/Simulink. Candidates
should be able to demonstrate advanced experience and skills in creating
own TRNSYS 17 components using a Fortran or C++ compiler. A basic knowledge
of thermodynamics, heat transfer theory as well as control theory will be
helpful in achieving the above-defined objectives in a time-efficient
manner.

*Location*: London

*Hours*: Full Time

*Contract Type*: Fixed-Term/Contract

*Contact*: Dr. Yang Wang; wangy47 at lsbu.ac.uk

2018-02-19 12:03 GMT+00:00 <trnsys-users-request at lists.onebuilding.org>:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.onebuilding.org/listinfo.cgi/trnsys-users-
> onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         trnsys-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Re: Evaporation rate from wet garments (Angel Carrera)
>    2. Re: active layer (Marion Hiller)
>    3. Re: active layer (Marion Hiller)
>
>
> ---------- 已转发邮件 ----------
> From: Angel Carrera <angel.carrera at aiguasol.coop>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc: Antoine Gautier <antoine.gautier at solamen.fr>
> Bcc:
> Date: Mon, 19 Feb 2018 10:21:26 +0100
> Subject: Re: [TRNSYS-users] Evaporation rate from wet garments
>
> Antoine,
>
> I usually refer to the annex 14 sourcebook from ebcs, free available
> online, good luck
>
> Angel
>
> El dia 16/02/2018 14.01, "Antoine Gautier via TRNSYS-users" <
> trnsys-users at lists.onebuilding.org> va escriure:
>
> Dear users
>
>
>
> We are currently involved in the design of touristic barges with panoramic
> glazing.
>
> To assess the condensation risk, the client asks us to consider a worst
> case scenario consisting in a rainy day with passengers wearing wet clothes.
>
> Do you know any model or conservative approach to assess the corresponding
> latent gains? (Managing my expectations I did not ask for any standard…)
>
> Any insight into that matter will also be welcome.
>
>
>
> Thanks a lot for your help.
>
> Best
>
> --
>
> Antoine Gautier
>
> Solamen
>
> +33 6 58 24 02 60 <+33%206%2058%2024%2002%2060>
>
> antoine.gautier at solamen.fr
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
>
> ---------- 已转发邮件 ----------
> From: Marion Hiller <Hiller at transsolar.com>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>, "trnsys-users at cae.wisc.edu" <
> trnsys-users at cae.wisc.edu>
> Cc: Karol BANDURSKI <karol.bandurski at put.poznan.pl>
> Bcc:
> Date: Mon, 19 Feb 2018 12:03:33 +0000
> Subject: Re: [TRNSYS-users] active layer
>
> Karol,
>
>
>
> did you define the ceiling containing the TAB as ADJACENT surface between
> the two airnodes?
>
> If yes, NType 58 should give the same result no matter which airnode
> /surfaceID is selected.
>
>
>
> If you can’t detect any other error (like looking at a wrong output…) you
> may send your project to (hotline at transsolar.com).
>
>
>
> Marion
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *-----------------------------------------------------------------------------------------------------------------------------------------------------------*
>
> *Dipl.-Ing. Marion Hiller *
> *TRANSSOLAR Energietechnik GmbH *
> *Stuttgart - Munich - New York - Paris *
>
> *t: +49.711.67976.0 <%2B49.711.67976.27>   f: +49.711.67976.11
> <%2B49.711.67976.11>*
>
> *www.transsolar.com/ <http://www.transsolar.com/>*
>
>
> *KlimaEngineering - Technologien für energieeffizientes Bauen und
> Nutzerkomfort in Gebäuden  Transsolar Energietechnik GmbH, Curiestrasse 2,
> 70563 Stuttgart *
>
> *Amtsgericht Stuttgart - HRB 23347** / Steuernummer: 99073/00911 /
> USt-IdNr.: DE 152272639*
> * Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter
> Schnelle *
>
>
>
>
>
> *Von:* TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] *Im
> Auftrag von *Karol BANDURSKI via TRNSYS-users
> *Gesendet:* Samstag, 17. Februar 2018 00:46
> *An:* trnsys-users at cae.wisc.edu
> *Cc:* Karol BANDURSKI <karol.bandurski at put.poznan.pl>
> *Betreff:* [TRNSYS-users] active layer
>
>
>
> Dear All
>
>
>
> I model thermal active building system. My ceiling is between two zones.
>
> When I ask TRNBuild for outlet temperature from active layer -TOFL (NType
> 58) – I can do it choosing upper or lower zone of the ceiling.
>
>
>
> Why do I get different values for this two outputs? If I understand: they
> both related to the same ceiling and the same pipes…
>
>
>
> Regards,
>
> Karol
>
>
>
> --------------------------------------------------------------------
>
> Karol BANDURSKI M. Sc.
>
> Faculty of Civil and Environemntal Engeneering
>
> Division of Heating, Air Conditioning and Air Protection
>
> Poznan University of Technology
>
> www.put.poznan.pl/~karol. bandurski
> <http://www.put.poznan.pl/~karol.bandurski>
>
> https://www.researchgate.net/profile/Karol_Bandurski
>
>
>
>
> ---------- 已转发邮件 ----------
> From: Marion Hiller <Hiller at transsolar.com>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>, "trnsys-users at cae.wisc.edu" <
> trnsys-users at cae.wisc.edu>
> Cc: Karol BANDURSKI <karol.bandurski at put.poznan.pl>
> Bcc:
> Date: Mon, 19 Feb 2018 12:03:33 +0000
> Subject: Re: [TRNSYS-users] active layer
>
> Karol,
>
>
>
> did you define the ceiling containing the TAB as ADJACENT surface between
> the two airnodes?
>
> If yes, NType 58 should give the same result no matter which airnode
> /surfaceID is selected.
>
>
>
> If you can’t detect any other error (like looking at a wrong output…) you
> may send your project to (hotline at transsolar.com).
>
>
>
> Marion
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *-----------------------------------------------------------------------------------------------------------------------------------------------------------*
>
> *Dipl.-Ing. Marion Hiller *
> *TRANSSOLAR Energietechnik GmbH *
> *Stuttgart - Munich - New York - Paris *
>
> *t: +49.711.67976.0 <%2B49.711.67976.27>   f: +49.711.67976.11
> <%2B49.711.67976.11>*
>
> *www.transsolar.com/ <http://www.transsolar.com/>*
>
>
> *KlimaEngineering - Technologien für energieeffizientes Bauen und
> Nutzerkomfort in Gebäuden  Transsolar Energietechnik GmbH, Curiestrasse 2,
> 70563 Stuttgart *
>
> *Amtsgericht Stuttgart - HRB 23347** / Steuernummer: 99073/00911 /
> USt-IdNr.: DE 152272639*
> * Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter
> Schnelle *
>
>
>
>
>
> *Von:* TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] *Im
> Auftrag von *Karol BANDURSKI via TRNSYS-users
> *Gesendet:* Samstag, 17. Februar 2018 00:46
> *An:* trnsys-users at cae.wisc.edu
> *Cc:* Karol BANDURSKI <karol.bandurski at put.poznan.pl>
> *Betreff:* [TRNSYS-users] active layer
>
>
>
> Dear All
>
>
>
> I model thermal active building system. My ceiling is between two zones.
>
> When I ask TRNBuild for outlet temperature from active layer -TOFL (NType
> 58) – I can do it choosing upper or lower zone of the ceiling.
>
>
>
> Why do I get different values for this two outputs? If I understand: they
> both related to the same ceiling and the same pipes…
>
>
>
> Regards,
>
> Karol
>
>
>
> --------------------------------------------------------------------
>
> Karol BANDURSKI M. Sc.
>
> Faculty of Civil and Environemntal Engeneering
>
> Division of Heating, Air Conditioning and Air Protection
>
> Poznan University of Technology
>
> www.put.poznan.pl/~karol. bandurski
> <http://www.put.poznan.pl/~karol.bandurski>
>
> https://www.researchgate.net/profile/Karol_Bandurski
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180219/2ff2827a/attachment-0001.html>