[TRNSYS-users] (no subject)

[David BRADLEY]

berkane ahlem

It is a little hard to answer without knowing the larger story of what 
you are trying to model. Type668 models a single speed compressor heat 
pump and the model computes power consumption as an output. If your 
system is one in which a power source charges a battery that is then 
used to run a heat pump then you could accomplish such a thing using 
Type668, controllers, and equations. If, on the other hand, your heat 
pump can run on a variable amount of power (for instance it may have a 
variable speed compressor in it so that it runs as much as it can given 
the input power availability) then you'd need to write a new heat pump 
model.

kind regards,

  David



On 08/08/2018 03:34, berkane ahlem via TRNSYS-users wrote:
>
> Hello everyone ,
>  I would like to ask, how can i controled the power consumption by 
> compressor, i use type 668 water to water heat pump
> Thank you
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180808/e7d95fac/attachment.htm>