[TRNSYS-users] control signal

[Mehrdad Vojdani]

Dear TRNSYS users,

I have a problem with controlling type 665 (split heat pump). As you may
know, this type uses catalogue data to interpolate and find the right
outputs. In the case of extrapolating, a warning will occur. The type would
return minimum or maximum output.
When I set the control signal for the type (Cooling signal or Heating
signal) MANUALLY to 1 and ran the simulation, no error or warning occurred.
But when I try to control the type with some equations, too much warning
and finally an error...
I used the equations to set some sort of seasonal thermostat.
I will attach my file (*.tpf *.bui *.tm2).

Thanks for your help.

Mehrdad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180809/b093d9af/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: conex.bui
Type: application/octet-stream
Size: 24092 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180809/b093d9af/attachment-0003.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SAC_heatpump.tpf
Type: application/octet-stream
Size: 234424 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180809/b093d9af/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Teheran-hour.tm2
Type: application/octet-stream
Size: 1261501 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180809/b093d9af/attachment-0005.obj>