<div dir="ltr">Dear TRNSYS users,<div><br></div><div>I have a problem with controlling type 665 (split heat pump). As you may know, this type uses catalogue data to interpolate and find the right outputs. In the case of extrapolating, a warning will occur. The type would return minimum or maximum output. </div><div>When I set the control signal for the type (Cooling signal or Heating signal) MANUALLY to 1 and ran the simulation, no error or warning occurred. </div><div>But when I try to control the type with some equations, too much warning and finally an error...</div><div>I used the equations to set some sort of seasonal thermostat.</div><div>I will attach my file (*.tpf *.bui *.tm2). </div><div><br></div><div>Thanks for your help.</div><div><br></div><div>Mehrdad <br></div></div>