[TRNSYS-users] Invalid floating point operation

[David BRADLEY]

Bishan,

  You'll need to send the project file and any other files needed in 
order to run the project to your distributor. If you aren't sure who to 
contact, please let me know and I can help you find the correct hotline.

kind regards,

  David



On 04/09/2018 13:33, Bishan Thapa via TRNSYS-users wrote:
> Hello everyone,
>
> I am designing a solar combisystem in TRNSYS and when I run the 
> simulation, at around 260 hrs, it stops and shows the error " Invalid 
> floating point operation". I encounter this problem, when I run the 
> whole year data but if I simulate it week by week by it is fine in the 
> above time step.
>
> Could you please recommend me the solution for this. If need be I can 
> send the trnsys file as well.
>
> Please find the attached online plotter snapshots showing how in one 
> simulation it stops and in another simulation it does not.
>
>
> Thanks,
> Bishan Thapa
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180410/50784cbb/attachment.htm>