[TRNSYS-users] Type 534

[Schranzhofer, Hermann]

Hi Jeff,

It is just a simple example. Find attached the data file and the studio file. TRNSYS Version is 17.02.0004.

Thanks,

Hermann.


Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Jeff Thornton via TRNSYS-users
Gesendet: Donnerstag, 12. April 2018 18:34
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Jeff Thornton <thornton at tess-inc.com>
Betreff: Re: [TRNSYS-users] Type 534


Send us your data file and we'll take a look at it.  Which TRNSYS version are you using?  Are you supplying the correct data file name on the files tabk of the proformaa?



Jeff



---
Jeff Thornton

President - TESS LLC

22 N. Carroll Street, Madison WI USA 53703

Office: (608) 274-2577  Fax: (608) 278-1475

www.tess-inc.com<http://www.tess-inc.com>

E-Mail: thornton at tess-inc.com<mailto:thornton at tess-inc.com>

On 04/12/2018 10:27 am, Schranzhofer, Hermann via TRNSYS-users wrote:
Hi,

I want to use the TESS storage tank model Type 534 for some simulations. What I need is stratified inlets. As far as I can see this is not possible with the proforma without plugin (the parameters are locked).
So I tried my best with the plugin. Configuration is no problem but if I press the OK button in the plugin a message appears telling me “Problem reading cycle number iteration”.
If I start the simulation anyway I get the Fatal Errors below:

*** Fatal Error at time   :         0.000000
    Generated by Unit     :     6
    Generated by Type     :   534
    Message               : The storage tank model was unable to read the parameter values from the supplied data file.  Please check the location and format of this data file carefully.

*** Fatal Error at time   :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     :   534
    TRNSYS Message    105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file
    Reported information  : Reported by LinkCk

Is there any help for this problem?

Regards,
Hermann.




_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>

http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180413/55bf8b5d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Example_534.dat
Type: application/octet-stream
Size: 328 bytes
Desc: Example_534.dat
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180413/55bf8b5d/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Type534.tpf
Type: application/octet-stream
Size: 79527 bytes
Desc: Type534.tpf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180413/55bf8b5d/attachment-0003.obj>