[TRNSYS-users] Error-linear parabolic concentrator (Type 536)

[Jeff Thornton]

Mohamed, 

Did you make sure that the parameters that list the number of points in
the file matches the number of points actually in the file? That's often
the issue. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 10/27/2017 11:52 am, Mohamed Krarouch via TRNSYS-users wrote: 

> hello everyone, 
> 
> I am sorry if this question had been raised before. I am working on a model with flat plate collectors, thermal storage, pumps, etc. It runs fine. However, when I change the collector type to linear parabolic concentrator (Type 536) with sample file for Bi-Axial IAMs, I am getting this error : "The utility subroutine DATA cannot read the specified input data file. Make sure that the file is ASSIGNed correctly and that the file has the correct format. Reported information : ASSIGNED LOGICAL UNIT 10". 
> 
> I had already checked the path, file size and the contents of the external file. So no issues there. 
> 
> Any ideas/suggestions? 
> Thank you. 
> 
> Best regards, 
> Mohamed 
> -- 
> 
> Krarouch Mohamed 
> Doctorant en Département Physique 
> Laboratoire de Mécanique des Fluides et Énergétique 
> 
> Faculté des sciences Semlalia
> 
> Université Cadi Ayyad
> Marrakech 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171027/414d9392/attachment.htm>