[TRNSYS-users] Access violation

[David BRADLEY]

LiaoGang,

  Yes, you can link to the IMSL library. You may have to add some 
additional library files to the CVF project that you use to compile your 
Type so that you can have access to those functions.

kind regards,

  David



On 11/29/2017 03:28, 廖刚 via TRNSYS-users wrote:
>  David
> I 'm sorry for reply you so late,It has been a long time for me to 
> understand how to debug in CVF,Now I finally found out the "access 
> violation" maybe caused by calling IMSL Library（I use it to solve a 
> non-linear equation set）,My question is whether it is ok to call IMSL 
> library in user made component?
>
>  best
>
> LiaoGang
>
>     -----原始邮件-----
>     *发件人:*"廖刚 via TRNSYS-users" <trnsys-users at lists.onebuilding.org>
>     *发送时间:*2017-11-03 16:21:21 (星期五)
>     *收件人:* "David BRADLEY" <d.bradley at tess-inc.com>
>     *抄送:* "廖刚" <liaogang at csu.edu.cn>, "TRNSYS users mailing list at
>     OneBuilding.org" <trnsys-users at lists.onebuilding.org>
>     *主题:* Re: [TRNSYS-users] Access violation
>
>       David
>     Thanks for your early reply,I add my component to the TRNDll
>     project and I run it in debug model. but it still can not work
>     after I chosen the dck file ,
>     crashed with the information" First-chance exception in TRNExe.exe
>     (TYPE207.DLL): 0xC0000005: Access Violation"
>      Regards,
>      LiaoGang
>
>     At2017-10-31 22:20:36，廖刚163912048 at csu.edu.cn
>     <mailto:163912048 at csu.edu.cn>wrote:
>
>         An access violation is a very generic error that can be caused
>         by many different problems.
>
>         You may get a little more information about the cause of the
>         error if you go into the component control cards in Simulation
>         Studio and turn on "debug mode." This will cause your
>         simulation to run a bit more slowly but will perform some
>         additional checks that may lead you to a solution.
>
>         If that does not work then there should be a CVF66 compiler
>         workspace already set up in the ..\Trnsys16\Compilers\
>         directory that will allow you to recompile the TRNDll itself.
>         I would recommend that you add your component to the TRNDll
>         project then run your simulation from the compiler (instead of
>         from the Studio). This will allow you to step one line at a
>         time through the code in your component and see where the
>         access violation is taking place. There are some instructions
>         on how to do this located in the 08-ProgrammersGuide manual.
>
>         Lastly, please be aware that Trnsys16 was replaced by v17 in
>         2009 and by v18 earlier this year. Official support for older
>         versions continues for a year after the release of a new
>         version. After that time the distributors try to provide help
>         on earlier versions when they are able and have some spare
>         time to do so.
>
>         kind regards,
>
>          David
>
>
>
>         On 10/30/2017 03:10, 廖刚 via TRNSYS-users wrote:
>>         Dear TRNSYS user,
>>            I'm trying to create a new component for a solar cooling system.I have installed the  CVF6.6 compiler and TRNSYS16.
>>         my component model code was compiled without error and the type201.dll was successfully generated,but when I trying to run it
>>         in the trnsys studio,I got an error "Access  violation at address 08E63E0F in module'Type201.dll'.Read of address 00000002 ".
>>
>>         /Any help or hints greatly appreciated. Regards. LiaoGang /
>>
>>
>>         _______________________________________________
>>         TRNSYS-users mailing list
>>         TRNSYS-users at lists.onebuilding.org
>>         http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>         -- 
>         ***************************
>         David BRADLEY
>         Principal
>         Thermal Energy Systems Specialists, LLC
>         22 North Carroll Street - suite 370
>         Madison, WI  53703 USA
>
>         P:+1.608.274.2577
>         F:+1.608.278.1475
>         d.bradley at tess-inc.com
>
>         http://www.tess-inc.com
>         http://www.trnsys.com
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171129/679d31b5/attachment.htm>