[TRNSYS-users] type 107 absorbtion chiller

[Patxi Sorbet Presentacion]

Dear a Aditi,
I performed a similar operation years ago, for below zero temperature solar applications
Type 107 is a very simple one, you could read the mathematical description to check it out
Performance curves are provided from an external file and simple energy balances, without thermal inertia, using COP from a data file
You should identify a potential candidate H20-NH3 Chiller for your application, get its characteristic curves and translate them to the performance data file, using the desired number of points
Regards,

Patxi Sorbet
CENER – NATIONAL RENEWABLE ENERGY CENTRE of SPAIN

De: Aditi Garg [mailto:aditigarg107 at gmail.com]
Enviado el: domingo, 12 de noviembre de 2017 12:09
Para: trnsys-users at lists.onebuilding.org
Asunto: [TRNSYS-users] type 107 absorbtion chiller


Hello everyone,

I was using the type 107  hot water fired single effect absorption chiller. I would like to know if this is a lithium bromide water based chiller as the chilled water temperature has reached a low to only 5.5 degree Celsius in the component external files.
how can I modify it into a ammonia- water based absorption chiller?




Regards
Aditi Garg
PhD Research Scholar
Department of Mechanical Engineering
Indian Institute of Technology, Delhi
Hauz Khas,New Delhi-110016
India
Email ID: aditigarg107 at gmail.com<mailto:aditigarg107 at gmail.com>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171113/3397528d/attachment.htm>