[TRNSYS-users] Mistakes configuration serie-paralel type 1

Jeff Thornton thornton at tess-inc.com
Tue Nov 7 11:53:49 PST 2017


Alex,

Your e-mail is  a bit confusing.  You state that you have a total area 
of 15 m2, but then go on to describe two arrays that don't have a total 
area of 15 m2.  Please clarify.  You should also check the archives as 
we've discussed the collectors in series thread multiple times.  I've 
also attached a picture for you to study.  Given the same collector 
performance and array flow rate, each of the 4 arrangements shown in the 
diagram will provide IDENTICAL results.  By understanding why that is 
the case, you should be able to quickly resolve your particular 
scenario.

Jeff



---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577  Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com


On 11/06/2017 1:54 pm, Alex moreno via TRNSYS-users wrote:
> I am working with a model that I need to work with collectors
> connected in series, the total area of the collector is 15m2, each
> collector has an area of 0.1 m2, and the intercept efficiency 0.62 and
> the coefficient 12 W / m2k approx, my question arises because I get
> very similar results in the following two configurations:
> 
> 1 configuration:
>    Type 1b --- Area = 16.2m2 n series = 1 mass flow = 75kg / hm2 * Area
> 
> 2 configuration
> 24 Type 1b connected in parallel and each type 1 configured in the
> following way: Area = 0.556 Areatot = 0.556 * 24 nserie = 12 masflow =
> 75 * Areatot / nserie
> 
> 
> In my opinion I think the second configuration would have to give a
> lower performance, although the total area of the twelve collectors in
> series is small .0.566m2, I think the performance of the installation
> would have to be smaller.
> 
> You can help me clarify this doubt
> 
> Thank you
> 
> Alex
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Collector Layout.bmp
Type: image/x-ms-bmp
Size: 1242054 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171107/adc5ff0f/attachment-0002.bmp>


More information about the TRNSYS-users mailing list