[TRNSYS-users] Initial value for pressure

[Ghady Dib]

Dear all,


I am using the Compressed Gas Storage and I am fixing an initial pressure.


My question is the following: the term “initial values” means at Time =
TIME0? But when I plot the pressure Vs the simulation time, the pressure at
T=0 is equal to zero.

-- 


* Ghady DIBDoctorantLaboratoire CETHIL UMR 5008 Groupe Energétique des
Systèmes Thermiques et Frigorifiques (ESTF) Département Génie Energétique
et Environnement INSA Lyon FranceTel:+ (33) 6 33 52 96 74
<%2B%20%2833%29%206%2033%2052%2096%2074>*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171107/ecae0b46/attachment.html>