[TRNSYS-users] pane temperature calculation is diverging

[David BRADLEY via TRNSYS-users]

Yannick,

   If you have variable (temperature dependent) heat transfer 
coefficients on the inside surface of your window, you should change 
them to be constant. This is not guaranteed to solve the problem but may 
help.

kind regards,

  David



On 03/14/2017 06:28, Yannick Ngatchou Djapou via TRNSYS-users wrote:
> ​Hello !
> While running my simulation in trnsys 16 I get the following error in 
> the listing file:
> Zone   2 surface   12 pane temperature calculation is diverging at 
> time      1.00000TDIF:  NaN                 ITPANE:   31 ITCALC:   32
>
> Any ideas about what could cause that? ​
> Thanks for your help
> Yannick
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170314/ecb5ab74/attachment-0003.htm>