[TRNSYS-users] pane temperature calculation is diverging

[Arian Bahrami via TRNSYS-users]

Hi,

I think you have to play with your time step to see if it is going to be resolved or not. Most of these error can be sorted out by a suitable time step or another solver.

Best Regards,

Arian

Sent from my iPhone

> On 14 Mar 2017, at 1:28 pm, Yannick Ngatchou Djapou via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> ​Hello !
> While running my simulation in trnsys 16 I get the following error in the listing file:
> Zone   2 surface   12 pane temperature calculation is diverging at time      1.00000TDIF:  NaN                 ITPANE:   31 ITCALC:   32
> 
> Any ideas about what could cause that? ​
> Thanks for your help
> Yannick
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170314/46d72a20/attachment-0003.htm>