[TRNSYS-users] What is the meaning of the identical temperature for a boundary wall?

Wed Mar 8 08:22:14 PST 2017

Arian,

  I would recommend that you refer to the 05-TRNBuild/Type56 manual for 
the answer to this question.

kind regards,

  David

On 03/07/2017 18:27, Arian Bahrami via TRNSYS-users wrote:
> Dear all,
>
> What is the meaning of identical temperature for a boundary wall? Does it mean that the outside boundary wall temperature is set to indoor temperature?
>
> If so, I used this assumption and also set h  back to zero but the output file of the boundary wall does not indicate that one or both sides of the boundary wall is equal to indoor temperature.
>
> However, when I created a loop from type 54 to itself and used indoor temperature as input of the boundary wall temperature then the outside boundary wall temperature is always the same as indoor temperature in output file. So, what is happening here and what identical term means ?
>
>
> Best Regards,
>
> Arian.
>
> Sent from my iPhone
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com