[TRNSYS-users] Trnsys 17+Genopt problem

[Georgios Kyriakarakos via TRNSYS-users]

Dear Tian,

Do the new types you have added have any external file dependencies? If yes make sure that you use absolute full paths for those files and not relative to the trnsys folder paths.
Best regards,

George
------------------------------------------------------------------
Dr. George Kyriakarakos, Agricultural Engineer
PhD, MSc Energy Systems & Renewable Energy Sources
Agricultural University of Athens,
Dept. of Natural Resources and Agricultural Engineering
Iera odos street, 75, Athens 11855, Greece
Tel. +30.210.5294046 (direct), Fax:+30.210.5294023
Mobile +30.6942.046895
e-mail: <gk at aua.gr>
-------------------------------------------------------------------

----- Original Message -----
Από: Zhiyong Tian via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Ημερομηνία: Thursday, March 2, 2017 4:28 pm
Θέμα: [TRNSYS-users] Trnsys 17+Genopt problem
Προς: "trnsys-users at lists.onebuilding.org" <trnsys-users at lists.onebuilding.org>


> Dear all,
> 
> I have a strange problem about the Genopt. I have an early verision of 
>  trnsys model and Genopt, which can run perfectly.
> 
> I just update my model with new types, actually just one type. The 
> TRnsys model can run without any problems.
> 
> But, when I want to run Genopt in the updated model, there are always 
> some error like below.
> 
> Any people know any solutions to this?
> 
> 
> Tian
> 
> 
> Optimization terminated with error.
> 
> Error message:
> **************
> java.lang.Exception:
> 
> Exception in executing the simulation program
> 
> Simulation working directory : 'C:\Trnsys17\Optimization\GenOpt\Simulation\tmp-genopt-run-1'
> Command string               : 'C:\Trnsys17\Exe\TRNExe.exe 
> "C:\Trnsys17\Optimization\GenOpt\Simulation\tmp-genopt-run-1\GenoptInputFile.DCK" 
> /n /WAIT '
> Exception message:
> 
> Error in executing the simulation program
> Exit value of the simulation program: 1
> Working directory                   : 'C:\Trnsys17\Optimization\GenOpt\Simulation\tmp-genopt-run-1'.
> Current command String              : 'C:\Trnsys17\Exe\TRNExe.exe 
> "C:\Trnsys17\Optimization\GenOpt\Simulation\tmp-genopt-run-1\GenoptInputFile.DCK" 
> /n /WAIT '.
> Error stream of simulation program  : Simulation program did not 
> return an error stream.
> 
> 
> GenOpt terminated with error.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org