[TRNSYS-users] Error in simulation

[Ismail OUHALLOU via TRNSYS-users]

Dear Tnsys users,

I want to simulate an AHU building integrated using type 112b. Control
signal of type 112b is: The fan (type 112b) is to be ON if the relative
humidity of a zone is greater than 70%.
When I run simulation, it gets blocked at a given time as shawn in figure
below:

​
Where does the problem come from ?

Thanks in advance
Ismail


-- 
**************************************************
*Ismail OUHALLOU*
Green building & Sustainability consultant

*Morocco*
P:+212 620 548 116
F:+212 522 326 440
i.ouhallou at trusted-energy.com
issmail.ouhallou at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170712/bc58c5ac/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Capture.PNG
Type: image/png
Size: 93598 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170712/bc58c5ac/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Capture.PNG
Type: image/png
Size: 93598 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170712/bc58c5ac/attachment-0007.png>