[TRNSYS-users] Save and re-use control cards quickly

[Jeff Thornton via TRNSYS-users]

Vincent - 

Actually there is a way - but it's kind of sneaky! Set the control cards
you wish to change to STRINGS and give them equation names: STARTTIME,
STOPTIME, TIMESTEP, ATOL, DTOL etc, 

Then drag out one of the equation components and define these equation
names / values for one of your cases. Make sure to change the name of
the equation component to something descriptive: MAY_JUNE_0PT25HOURS for
example When you are finished, test it to make sure it runs and then
right click on the equation component in the assembly window and choose
SAVE. Pick a location in the Studio/Proformas directory that you'll
remember and save it there. Repeat this process for each of the
simulation cards that you wish to create. Then choose the Direct Access
--> Refresh Tree option to re-load the libraries. Now you've got a
library of control cards that you can drag out and use each time you'd
like a change. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 07/03/2017 2:58 pm, David BRADLEY via TRNSYS-users wrote: 

> Vincent, 
> 
> There is not a way to save more than one set but it is an interesting idea! 
> 
> best, 
> 
> David 
> 
> On 06/28/2017 07:14, Vincent Höfte via TRNSYS-users wrote: 
> 
>> Hi all, 
>> 
>> I am relatively new to TRNSYS and maybe this is an obvious question, but I couldn't find the answer in the documentation. 
>> 
>> Is it possible to save different pre-sets of Control Cards? I will have to do a lot of simulations with different durations and time steps, but I wish not to manually change all the input of the control cards every time I do a simulation with, for example, a different .BUI file. 
>> 
>> For example; I would like to have simulations for four seasonal representative weeks of the year (21-st-28th of March, Jun, Sep, Dec) with a time step of 0,5 hour, and also half a year with a time step of one hour. I want to save the control cards, so I don't have to change the simulation start and step hours, the time step and the tolerances all the time. 
>> 
>> I hope my question is clear and that you can help me. Thanks in advance, 
>> 
>> Regards, 
>> 
>> Vincent Höfte 
>> 
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
> 
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI 53703 USA
> 
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
> 
> http://www.tess-inc.com [2]
> http://www.trnsys.com [3]
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[2] http://www.tess-inc.com
[3] http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170704/54c5b685/attachment.htm>