[TRNSYS-users] TRNBUILD idf import error

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Jul 3 13:56:35 PDT 2017


Arnaud,

  I think the adjacent window on the back side of ATR1 (the long wall 
that is further from the origin) is missing its window. There is a 
corresponding window in LEV1.

  I also think there may be a problem in that LEV1 and RDC should both 
be annuli. If you hide all but one of those zones and then click on its 
roof, you'll see that the roof extends over what should be the space 
taken up by the corresponding atrium zone. If you redraw one of the 
sides of the cutout, it will turn into a window that you can then 
delete. Check both the ceilings and floors of both LEV1 and RDC.

kind regards,

  David



On 06/29/2017 04:36, Arnaud Candaele via TRNSYS-users wrote:
> Hello,
>
> I have difficulties importing an idf file created with Sketchup.
> The import goes mainly well, except for 3 surfaces (2 walls and 1 
> window, which belong to one of these walls), for which I got the 
> following error message: "adjacent wall not found" and "adjacent 
> window not found".
>
> These walls are indeed interior walls. They are set as "ADJ_WALL", 
> with "Outside Boundary Condition" set as "Zone", with the correct 
> corresponding zone. And in the adjacent zone, the walls have the same 
> construction, and the reciprocal zone set.
>
> All vertices correspond exactly.
>
> Basically I followed these instructions: 
> http://onebuilding.org/archive/trnsys-users-onebuilding.org/2013-February/024640.html
>
> ..but in the TRNBUILD, I do have "undefined" written next to that walls.
>
> I join here my idf.
>
> Thanks a lott for any help!
> Arnaud.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170703/b2067d2d/attachment.htm>


More information about the TRNSYS-users mailing list