[TRNSYS-users] Regarding Operating Power of heating system in Type 56 Multizone Building

[hotline via TRNSYS-users]

Dar Niket,

as mentioned in the name, this heating type is ideal and cannot deal with minimum heating powers.
You could use internal gains instead and control them with Type2…

Best
Jakob

__________________________________________________________________________________________________

Jakob Merk M.Sc.

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Telefon: +49 711 67976-0
Fax:        +49 711 67976-11
Email:    merk at transsolar.com<mailto:merk at transsolar.com>
http://www.transsolar.com<http://www.transsolar.com/>
Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Stuttgart – München – New York – Paris
Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle
Eingetragen beim Amtsgericht Stuttgart HRB 23347,
Steuernummer: 99073/00911,USt-IdNr.: DE 152272639



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Niket Kumar via TRNSYS-users
Gesendet: 25 February 2017 12:19
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] Regarding Operating Power of heating system in Type 56 Multizone Building

Dear All,

I am trying to see the power consumption of heating system in my model and for this I am using Heating Type Manager for a zone in TRNBuild.

The Heating Type Manager has options of set temperature and heating power (which is limited to say 7200 KJ/h in my case). As of now, When I am switching on the heating system for the zone and seeing 1 min interval sensible heating energy demand, It is coming variable and power consumption is gradually increasing or decreasing.

But in actual case the heating system is such that it works only at its fullest (i.e. 7200 KJ/h), so either it is consuming 7200 or no consumption. So, Ideally this should be the way my model should be behaving, but its not the case here.

Can anyone please suggest me how can I do this?

Thanking you,
regards,
Niket Kumar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170228/579b3b73/attachment.htm>