[TRNSYS-users] TRNSYS Building Modeling with Triangular or Trapezoidal plan

[Arian Bahrami via TRNSYS-users]

Dear Jakob

I have TRNSYS 16. I dont know if it is possible to model a triangular prism in 16 or not.

Best Regards,

Sent from my iPhone

> On 20 Feb 2017, at 12:23 pm, hotline via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Dear Arian,
>  
> Your building geometry doesn’t have to be rectangular. But surfaces have to be planar and convex!
> Using TRNSYS 3d for Sketchup you can define 3D geometries. Or you define a model without 3D information with the Studio Multizone Wizard or TRNBuild. In this case, only surface areas are needed but no information on the geometry of a surface.
>  
> Best
> Jakob
>  
> _________________________________________________________________________________________________
>  
> Jakob Merk
> TRNSYS Software Team
> 
> Transsolar Energietechnik GmbH
> Curiestraße 2
> 70563 Stuttgart
> Fax:        +49 711 67976-11
> Email:    hotline at transsolar.com
> Web:      www.trnsys.de
>  
>  
>  
> Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Arian Bahrami via TRNSYS-users
> Gesendet: 16 February 2017 23:39
> An: trnsys-users at lists.onebuilding.org
> Betreff: [TRNSYS-users] TRNSYS Building Modeling with Triangular or Trapezoidal plan
>  
> Hi, 
>  
> I am new to the TRNSYS software. It will be nice of you to give some info regarding this issue, Is it possible to model one building zone with triangular or trapezoidal plan instead of its default rectangular plan? 
>  
> Sincerely,
>  
> Arian Bahrami
> arianbhm at yahoo.com
>  
>  
>  
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170220/6fb721fe/attachment-0001.htm>