[TRNSYS-users] TRNSYS Building Modeling with Triangular or Trapezoidal plan

hotline via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Feb 20 02:23:52 PST 2017

Dear Arian,

Your building geometry doesn’t have to be rectangular. But surfaces have to be planar and convex!
Using TRNSYS 3d for Sketchup you can define 3D geometries. Or you define a model without 3D information with the Studio Multizone Wizard or TRNBuild. In this case, only surface areas are needed but no information on the geometry of a surface.



Jakob Merk
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11
Email:    hotline at transsolar.com<mailto:hotline at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de/>

Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Arian Bahrami via TRNSYS-users
Gesendet: 16 February 2017 23:39
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] TRNSYS Building Modeling with Triangular or Trapezoidal plan


I am new to the TRNSYS software. It will be nice of you to give some info regarding this issue, Is it possible to model one building zone with triangular or trapezoidal plan instead of its default rectangular plan?


Arian Bahrami
arianbhm at yahoo.com<mailto:arianbhm at yahoo.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170220/5bb454f5/attachment.htm>

More information about the TRNSYS-users mailing list