[TRNSYS-users] Can "Type60s Storage Tank; Fixed Inlets, Uniform Losses and Node Heights" Be Used With a Liquid Other Than Water, Propylene Glycol, or Ethylene Glycol
Haq, Shomaz ul via TRNSYS-users
trnsys-users at lists.onebuilding.org
Thu Feb 9 10:48:34 PST 2017
Thanks a lot for the advice Jeff. Appreciate it. I have looked into other
options. Now I am using Type4a with two other components both heat
exchangers. Both cold and hot streams are stored in one tank. Can that work?
*Shomaz ul Haq* *| MS Graduate Researcher*
U.S. - Pakistan Center for Advanced Studies in Energy (USPCAS-E) *| *USAID
National University of Science and Technology (NUST) | Islamabad
T: +92.3234041087 | E: Shomazulhaq <Shomazulhaq at gmail.com>@
<Shomazulhaq at gmail.com>gmail.com
On Feb 9, 2017 11:01 PM, "Jeff Thornton via TRNSYS-users" <
trnsys-users at lists.onebuilding.org> wrote:
I would not be comfortable using Type 60 for molten salts and CO2. I
believe there are some storage models available in some of the the CSP
libraries which would be much more suitable.
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475www.tess-inc.com
E-Mail: thornton at tess-inc.com
On 02/09/2017 11:09 am, Haq, Shomaz ul via TRNSYS-users wrote:
I would be extremely grateful if someone could help me out. Thanks.
On Feb 9, 2017 7:05 PM, "Shomaz Haque via TRNSYS-users" <trnsys-users at lists.
> Dear all,
> Hello. Hope all are well. I am simulating a concentrated solar power (CSP)
> using supercritical CO2. I am using Type 60s for indirect storage of molten
> salt. My question is whether Type60s can be used as heat exchanger (HX)
> heat with CO2. It's "Parameter 33 HX Fluid Indicator-1" has only options
> for 1-Water 2-Propylene Glycol and 3-Ethylene Glycol. It doesn't go to 0.
> Also in its description it doesn't specify what fluid can be use in the HX.
> Would be extremely grateful if somebody could help and look into this. Hope
> to hear from someone soon. Thanks.
> *Shomaz ul Haq* *| MS Graduate Researcher*
> U.S. - Pakistan Center for Advanced Studies in Energy (USPCAS-E) *| *USAID
> National University of Science and Technology (NUST) | Islamabad
> T: +92.3234041087 | E: Shomazulhaq@ <Shomazulhaq at gmail.com>gmail.com
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the TRNSYS-users