[TRNSYS-users] Can "Type60s Storage Tank; Fixed Inlets, Uniform Losses and Node Heights" Be Used With a Liquid Other Than Water, Propylene Glycol, or Ethylene Glycol

[Haq, Shomaz ul via TRNSYS-users]

I would be extremely grateful if someone could help me out. Thanks.

On Feb 9, 2017 7:05 PM, "Shomaz Haque via TRNSYS-users" <
trnsys-users at lists.onebuilding.org> wrote:

> Dear all,
>
> Hello. Hope all are well. I am simulating a concentrated solar power (CSP)
> using supercritical CO2. I am using Type 60s for indirect storage of molten
> salt. My question is whether Type60s can be used as heat exchanger (HX)
> heat with CO2. It's "Parameter 33 HX Fluid Indicator-1" has only options
> for 1-Water 2-Propylene Glycol and 3-Ethylene Glycol. It doesn't go to 0.
> Also in its description it doesn't specify what fluid can be use in the HX.
> Would be extremely grateful if somebody could help and look into this. Hope
> to hear from someone soon. Thanks.
>
> Regards,
>
> *Shomaz ul Haq* *| MS Graduate Researcher*
>
> U.S. - Pakistan Center for Advanced Studies in Energy (USPCAS-E) *| *USAID
> Grantee
>
> National University of Science and Technology (NUST) | Islamabad
>
> T: +92.3234041087 | E: Shomazulhaq@ <Shomazulhaq at gmail.com>gmail.com
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170209/e7474cc8/attachment-0001.htm>