[TRNSYS-users] what is the upper dead band in controller ?

[leen peeters via TRNSYS-users]

Hi,

can you rephrase your question. The answer is probably easier than getting
the point of your higher lower than-part

leen

On 5 February 2017 at 20:33, ahmad abbasian via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Dear All
>
> in a differential controller what is the upper dead band? I know that when
> the difference of  Th and Tl is lower than "lower dead band temperature"
> the controller will actand , for example , the pump will be turned off. but
> for the difference higher lower than "upper dead band" and also higher than
> it, the pump is turned on !
>
>
> Thank you
>
>
> ............................................................
> ..................................
> Ahmad abbasianzadeh
> Solar energy Researcher
> Pensylvania
> [image: x0yyutg5hv1.png]
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170205/e9412b17/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OutlookEmoji-x0yyutg5hv1.png.png
Type: image/png
Size: 32126 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170205/e9412b17/attachment-0001.png>