[TRNSYS-users] Advanced thermal insulation techniques

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Tue Apr 18 08:17:59 PDT 2017


Issmail,

  TRNSYS 3d serves to define the building's geometry. Once you are 
finished defining the geometry then you move from Trnsys3D to TRNBuild 
where you will define (or modify) the materials that make up the walls 
of the building.

kind regards,

  David



On 04/13/2017 08:22, Issmail OUHALLOU wrote:
> David,
>
> It's clear now, thanks. I need to insulate the external wall, and for 
> that I have to compare the impact of insulation on thermal comfort, 
> for two cases: *1.* if the insulation (rock wool for instance) is 
> placed inside the wall, *2.* if the insulation is placed back of the 
> wall (external side). Is it possible? How to do so? The problem caused 
> by the difference between the thermal insulation from the outside and 
> the thermal insulation from the inside is the effect of the thermal 
> bridges ...
>
> *Note:* I only use Trnsys3d for modeling my building.
> I appologize for my english if it's not clear enough cause I only 
> practice this in french. Thanks.
>
>
> Best,
> Ismail
>
>
>
>
> 2017-04-13 12:22 GMT+00:00 David BRADLEY <d.bradley at tess-inc.com 
> <mailto:d.bradley at tess-inc.com>>:
>
>     Issmail,
>
>       The u value is only one measure of a wall's performance. The
>     other significant part is where the mass is located in the wall.
>     Type56's wall model takes both into account. The u-value is
>     displayed because it is a common measure of wall performance.
>
>     kind regards,
>
>      David
>
>
>
>     On 04/13/2017 05:12, Issmail OUHALLOU via TRNSYS-users wrote:
>>     Dear Trnsys users,
>>
>>     I am wondering if it is possible to compare the thermal
>>     performance of thermal insulation on both sides of the wall
>>     (internal & external), using TRNBuild and Trnsys3d (TRNSYS 17)!
>>     When I change the order of materials, including insulation
>>     material, in "wall type" manager/TRNBuild, the U-value does not
>>     chage.
>>     Does anyone happen to have experience how to simulate the impact
>>     of thermal insulation on both sides of the wall?
>>     Thanks in advance
>>
>>     best regards,
>>     Ismail
>>
>>     -- 
>>     /Ismail OUHALLOU/
>>     Green buildings & Sustainability concultant
>>
>>     *TRUSTED ENERGY S.a.r.l*
>>     Morocco
>>     Fax:  +212 522 326 440
>>     Mob: +212 620 548 116
>>     Email: i.ouhallou at trusted-energy.com
>>     <mailto:i.ouhallou at trusted-energy.com>
>>
>>
>>
>>
>>
>>     _______________________________________________
>>     TRNSYS-users mailing list
>>     TRNSYS-users at lists.onebuilding.org
>>     <mailto:TRNSYS-users at lists.onebuilding.org>
>>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>     <http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
>
>     -- 
>     ***************************
>     David BRADLEY
>     Principal
>     Thermal Energy Systems Specialists, LLC
>     22 North Carroll Street - suite 370
>     Madison, WI  53703 USA
>
>     P:+1.608.274.2577
>     F:+1.608.278.1475
>     d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
>
>     http://www.tess-inc.com
>     http://www.trnsys.com
>
> -- 
> /Ismail OUHALLOU/
> Green buildings & Sustainability concultant
> *TRUSTED ENERGY S.a.r.l*
> Morocco
> Fax:    +212 522 326 440
> Mob:   +212 620 548 116
> Email: i.ouhallou at trusted-energy.com 
> <mailto:i.ouhallou at trusted-energy.com>
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170418/73b549ad/attachment.htm>


More information about the TRNSYS-users mailing list