[TRNSYS-users] outside temperature of wall didi not converge

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Tue Apr 4 07:07:40 PDT 2017


Ahmad,

   If you have used an internally calculated convection coefficient for 
the inside surface of your walls/windows then try switching it to a 
constant value.

kind regards,

  David



On 04/04/2017 01:36, ahmad abbasian via TRNSYS-users wrote:
>
> Dear All
>
> Using type 56a (multi-zone building) with all the walls of glass (in 
> order to simulate a greenhouse) I'm getting following error. what is 
> the reason? Is the component order wrong?
>
>
>
> ..............................................................................................
> Ahmad abbasianzadeh
> Solar energy Researcher
> *Harrisburg, Pensylvania*
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170404/c4253b8d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 5522 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170404/c4253b8d/attachment-0001.png>


More information about the TRNSYS-users mailing list