[TRNSYS-users] outside temperature of wall didi not converge

[Arian Bahrami via TRNSYS-users]

Hi,
I had the same problem but I cannot remember what I did to resolve it. I think you can use other time step and run the simulation. It is also possible to be related to the convective heat transfer coefficient calculation whether you have used an equation for outside walls or not. 
Best Regards,
Arian Bahrami
 

    On Tuesday, April 4, 2017 11:06 AM, ahmad abbasian via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
 

  <!--#yiv3142137437 P {margin-top:0;margin-bottom:0;}-->Dear AllUsing type 56a (multi-zone building) with all the walls of glass (in order to simulate a greenhouse) I'm getting following error. what is the reason? Is the component order wrong?

..............................................................................................Ahmad abbasianzadehSolar energy ResearcherHarrisburg, Pensylvania

 _______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170404/6568dd14/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 5522 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170404/6568dd14/attachment-0001.png>