[TRNSYS-users] Problems with simulation start time

[David BRADLEY via TRNSYS-users]

Massimo,

  Check to see if you have the "Write TRNSED commands" option set to 
"true" in the project's control cards (the same place that you set the 
simulation start and stop time. If you do then it is possible that the 
simulation start and stop time that you set are being overwritten by the 
TRNSED command that sets them. Simply turn the "write TRNSED commands" 
to "false." If that is not the problem then I would recommend sending 
the project to your distributor with an explanation of the problem that 
you are encountering.

kind regards,

  David



On 11/22/2016 05:02, via TRNSYS-users wrote:
>
> I am trying to understand a model that I have not done it.
>
> One of the problems that I have is this: even if I change the 
> “simulation start time” and “simulation stop time” in control cards 
> they doesn’t change in the results.
>
> But if I change the values in the input file all it’s ok and the 
> results are like I want.
>
> I hope someone can help me
>
> Thanks a lot in advance,
>
> Massimo Truant
>
> Inviato da Posta <https://go.microsoft.com/fwlink/?LinkId=550986> per 
> Windows 10
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161122/1e47b847/attachment.htm>