[TRNSYS-users] Visual Fortran run-time error

Chaminda Ranaweera via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon May 23 10:19:30 PDT 2016


Hi,

I also had the same problem earlier, the problem was there 
was no enough data rows in weather file. I made my weather 
file with a note pad program. The weather data must be a 
multiple of 24.

Chaminda

On Fri, 20 May 2016 23:44:06 +0000
  Eleftherios Bourdakis via 
TRNSYS-users	<trnsys-users at lists.onebuilding.org> wrote:
> Dear TRNSYS users,
> 
> When I change the simulation start time from anything 
>different than 0 hr, I get the following error:
> 
> forrtl: severe (408): fort: (2): Subscript #1 of the 
>array VALUE_NOW has value 37 which is greater than the 
>upper bound of 36.
> 
> Do you know how I can solve this issue? Up to today 
>TRNSYS was working fine and I could start my simulation 
>at any time I wanted.
> Thank you in advance for your help.
> 
> Best regards,
> Eleftherios Bourdakis
> PhD Student
> International Centre for Indoor Εnvironment and Energy
> 
> Technical University of Denmark
> 
> [cid:image001.png at 01D1B2B3.C9DA92D0]
> 
> Department of Civil Engineering
> 
> Nils Koppels Allé
> 
> Building 402, Office 227
> 
> 2800  Kgs. Lyngby, Denmark
> 
> Mobile: (+45) 91940297
> Tel dir: (+45) 45254017
> 
> Email: elefbur at byg.dtu.dk<mailto:elefbur at byg.dtu.dk>
> 
> Web: www.byg.dtu.dk<http://www.byg.dtu.dk>
> 
> 




More information about the TRNSYS-users mailing list