[TRNSYS-users] TRNSYS crashes after several runs

[Victor Tulus via TRNSYS-users]

Dear all,

I have a TRNSYS model with a Type 56 building and a solar collector system
attached to it.
The original model was designed in TRNSYS 16, but I have recently managed
to move it to TRNSYS 17 (the relatively difficult part was to update Type
56 to TRNSYS 17).

When I run the model once, everything works fine. The problem starts when I
do several consecutive runs (without any changes in the parameters).
Sometimes the second run works perfectly as well, but on the third run the
Simulation studio crashes without any warning.
The only way I found to run many times the model was deleting all the files
which are generated after the previous simulation has finished.

Could you suggest something in order to avoid manual deleting of the output
files?
My concern is than in case I would like to do a parametric run or GenOpt
optimization, will I have to manually delete the output files every time?

Thank you in advance.
Regards,
Victor
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160628/56b0111b/attachment.htm>