[TRNSYS-users] Average

[Rami Al-Assad via TRNSYS-users]

Hello Hesin,

you can simply can use Type 84 to find the average of your variables, you
will find it in the library under Utility --> Moving Average --> Type 84

On Thu, Jun 2, 2016 at 10:59 AM, Hsein Moussawi via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Hi everyone,
>
>
> I am running a simulation over a year with a certain output calculated at
> each time step. what I want is to have the average of this parameter as an
> output at the end of simulation. Is there a smart way to do that?
>
>
> Regards.
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>


-- 
Rami Anton Al-Assa'd
Tel: 00962 7 88726129
P.O. Box 151201
ِِJordan 13115 Az Zarqa
E-mail: ramianton at Gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160602/5a0ab0aa/attachment.htm>