[TRNSYS-users] Gen-Opt with TRNOPT

[Heimrath, Richard via TRNSYS-users]

Dear Khem Raj Gautam,



all the results can be found within the File:



c:\Trnsys17\Optimization\GenOpt\Simulation\OutputListingAll.txt



[cid:image001.png at 01D24F15.050029D0]



With sunny regards,

Richard

---
Richard Heimrath
Dr. techn. Dipl.-Ing.
Institut fuer Waermetechnik / Institute of Thermal Engineering
Div. Energy-Efficient Buildings
TU Graz / Graz University of Technology
A-8010 Graz . Inffeldgasse 25b . Austria

Tel: +43 (316) 873 7317
Fax: +43 (316) 873 7305
E-mail: heimrath at tugraz.at
IWT web site: www.iwt.tugraz.at






-----Ursprüngliche Nachricht-----
Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Georgios Kyriakarakos via TRNSYS-users
Gesendet: Montag, 05. Dezember 2016 13:35
An: bridjesh gautam <bridjeshgautam at gmail.com>; TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: trnsys-users at lists.onebuilding.org
Betreff: Re: [TRNSYS-users] Gen-Opt with TRNOPT



Dear Khem Raj Gautam,



I have faced the same problem in the past. What you can do is copy the results from the grey column on the left (with ctrl+C) and paste them in a notepad, from where you can open them with any software you want, and also the window with the diagram can be captured via print screen.

Not the best approach, but it works...

Best regards,



George

----------------------------------------------------------------------------

Dr. George Kyriakarakos, Agricultural Engineer

MSc Energy Systems & Renewable Energy Sources, PhD.

Agricultural University of Athens,

Dept. of Natural Resources and Agricultural Engineering

Iera odos street, 75, Athens 11855, Greece

Tel. +30.210.5294046 (direct), Fax: +30.210.5294023

Mobile +30.6942.046895

e-mail: <gk at aua.gr<mailto:gk at aua.gr>>

----------------------------------------------------------------------------





----- Original Message -----

Από: bridjesh gautam via TRNSYS-users <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>>

Ημερομηνία: Monday, December 5, 2016 10:55 am

Θέμα: [TRNSYS-users] Gen-Opt with TRNOPT

Προς: trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>





> Dear TRNSYS Users,

> It seems when I use TRNOPT, the results files from each Gen-opt simulation

> is not written in the printer like when using parametric runs. Gen-opt

> results window does display the results but I could not find a way to

> save

> them.

> I would be glad if somebody can explain  how to save results of each

> gen-opt simulations?

>

> Yours

> Khem Raj Gautam

> Aarhus University

> _______________________________________________

> TRNSYS-users mailing list

> TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>

> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>

http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161205/810da88f/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 19569 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161205/810da88f/attachment-0003.png>