[TRNSYS-users] Gen-Opt with TRNOPT

Georgios Kyriakarakos via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Dec 5 04:35:09 PST 2016


Dear Khem Raj Gautam,

I have faced the same problem in the past. What you can do is copy the results from the grey column on the left (with ctrl+C) and paste them in a notepad, from where you can open them with any software you want, and also the window with the diagram can be captured via print screen.
Not the best approach, but it works...
Best regards,

George
----------------------------------------------------------------------------
Dr. George Kyriakarakos, Agricultural Engineer
MSc Energy Systems & Renewable Energy Sources, PhD.
Agricultural University of Athens,
Dept. of Natural Resources and Agricultural Engineering
Iera odos street, 75, Athens 11855, Greece
Tel. +30.210.5294046 (direct), Fax: +30.210.5294023
Mobile +30.6942.046895
e-mail: <gk at aua.gr>
 ---------------------------------------------------------------------------- 


----- Original Message -----
Από: bridjesh gautam via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Ημερομηνία: Monday, December 5, 2016 10:55 am
Θέμα: [TRNSYS-users] Gen-Opt with TRNOPT
Προς: trnsys-users at lists.onebuilding.org


> Dear TRNSYS Users,
> It seems when I use TRNOPT, the results files from each Gen-opt simulation
> is not written in the printer like when using parametric runs. Gen-opt
> results window does display the results but I could not find a way to 
> save
> them.
> I would be glad if somebody can explain  how to save results of each
> gen-opt simulations?
> 
> Yours
> Khem Raj Gautam
> Aarhus University
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org



More information about the TRNSYS-users mailing list