[TRNSYS-users] TBOUNDARY in Type-56

Mon Aug 8 09:34:10 PDT 2016

Joseph,

  In the template Type56 building file there is a BOUNDARY type wall and 
the temperature on the outside surface of that wall is an input variable 
called TBOUNDARY. If you did not use any walls of type BND_WALL then you 
can probably delete the TBOUNDARY input. Please note that the 
GROUND_FLOOR in the template building file obtains its back side 
temperature in the same manner from an input called TGROUND.

kind regards,

  David

On 08/04/2016 12:48, Joseph Oudi via TRNSYS-users wrote:
> Hi all,
>
>    Please can any one explain to me in details what this input
> "TBOUNDARY" in type-56 means ??
>    See attached file, thank you
>
> Best regards,
> Joseph.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160808/c926448d/attachment-0003.htm>