[TRNSYS-users] TBOUNDARY in Type-56

[Farah, Sleiman - farsy019 via TRNSYS-users]

Hello Joseph,

TBOUNDARY is an input to type 56. You can use this input as boundry temperature of a surface. The surface with TBOUNDRY will not be subject to ambient or adjacent zone temperatures.

Hope this helps.

Regards,

Sleiman Farah

PhD Candidate
School of Engineering
University of South Australia

-----Original Message-----
From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Joseph Oudi via TRNSYS-users
Sent: Friday, 5 August 2016 3:19 AM
To: trnsys-users at lists.onebuilding.org
Subject: [TRNSYS-users] TBOUNDARY in Type-56

Hi all,

  Please can any one explain to me in details what this input "TBOUNDARY" in type-56 means ??
  See attached file, thank you

Best regards,
Joseph.