[TRNSYS-users] Pre-simulation

[David BRADLEY]

Massimo,
   Assuming that you have a 1-year weather data file the best way to 
accomplish that is to set your simulation start time to an hour of the 
year near the end of december (8592, for example will set the simulation 
start time to one week before the end of december). You then set your 
simulation stop time to 17520. If you think that you need a longer 
warmup period (for instance if you are doing a building and ground 
coupling then you can simply run a multi year simulation (start time 0, 
end time 17520 26289, etc.)
kind regards,
  David


On 04/27/2016 08:21, massimo truant wrote:
>
> Good afternoon,
>
> My question is very simple: is possible to assign to trnsys a period 
> of time of pre-simulation before the real simulation (just to fix the 
> data of the iteration)?
>
> Thanks to all
>
> Inviato da Posta <https://go.microsoft.com/fwlink/?LinkId=550986> per 
> Windows 10
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160427/e3c41a8f/attachment-0003.htm>