[TRNSYS-users] Window material

[adnan rasheed]

Hi everyone,

i am trying to make an new plastic material to use in TRNbuild by using
LBNL window software 7.4 and in software edited required data (see attached
file) and transfer DOE-2 format file to TRNSbuild, A builtin TRNSbuild
glass materail named (single,5.8) is 4 mm thick and i am preparing
Polyethylene with 0.1mm thickness.. i am not sure where i am making mistake
so that glass heat

loss is higher then polyethylene material eventhough TRNSYS build shows
u-value for glass = 5.8 and polyethylene = 6.7.

can i get any help who have experience to make new window by using Window
software.


Best regards

Adnan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160427/e409b7df/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Material's property.jpg
Type: image/jpeg
Size: 99290 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160427/e409b7df/attachment-0001.jpg>